[1] | ISO 4126-1 | Safety devices for protection against excessive pressure - Part 1: Safety valves |
[2] | ISO 4135 | Anaesthetic and respiratory equipment - Vocabulary |
[3] | ISO 7183 | Compressed air dryers - Specifications and testing |
[4] | ISO 7183-2 | Compressed air dryers - Part 2: Performance ratings |
[5] | ISO 7396-2 | Medical gas pipeline systems - Part 2: Anaesthetic gas scavenging disposal systems |
[6] | ISO/TR 7470 | Valve outlets for gas cylinders - List of provisions which are either standardized or in use |
[7] | ISO 8573-2 | Compressed air - Part 2: Test methods for oil aerosol content |
[8] | ISO 8573-3 | Compressed air - Part 3: Test methods for measurements of humidity |
[9] | ISO 8573-4 | Compressed air - Part 4: Test methods for solid particle content |
[10] | ISO 8573-5 | Compressed air - Part 5: Test methods for oil vapour and organic solvent content |
[11] | ISO 8573-6 | Compressed air - Part 6: Test methods for gaseous contaminant content |
[12] | ISO 8573-8 | Compressed air - Part 8: Test methods for solid particle content by mass concentration |
[13] | ISO 9001:2000 | Quality management systems - Requirements |
[14] | ISO 10524-4 | Pressure regulators for use with medical gases - Part 4: Low-pressure regulators |
[15] | ISO 13485:2003 | Medical devices - Quality management systems - Requirements for regulatory purposes |
[16] | AS 2896-1998 | Medical gas systems - Installation and testing of non-flammable medical gas pipeline systems |
[17] | CAN/CSA-Z305.6-92 | Medical oxygen concentrator central supply system: for use with nonflammable medical gas piping systems |
[18] | CGA E-10-2001 | Maintenance of medical gas and vacuum systems in health care facile ties |
[19] | EN 475 | Medical devices - Electrically-generated alarm signals |
[20] | EN 12021 | Respiratory protective devices - Compressed air for breathing apparatus |
[21] | EN 13133 | Brazing - Brazer approval |
[22] | EN 13134 | Brazing - Procedure approval |
[23] | EN 14931 | Pressure vessels for human occupancy (PVHO) - Multi-place pressure chamber systems for hyperbaric therapy - Performance, safety requirements and testing |
[24] | FD S 90-155 | Systemes de distribution pour gaz medicaux comprimes et vide - Complements pour la conception et la reception ("Pipelines for compressed medical gases and vacuum - Additional elements for design and commissioning") |
[25] | HTM 02/01:2006 | Health Technical Memorandum - Medical gas pipeline systems, Part A: Design, installation, validation and certification |
[26] | HTM 02/01:2006 | Health Technical Memorandum - Medical gas pipeline systems, Part B: Operational management |
[27] | Monograph on Medical Air, European Pharmacopoeia Commission, 2005 | |
[28] | Monograph on Synthetic Air, European Pharmacopoeia Commission, 2005 | |
[29] | NFPA 99 | Health Care Facilities |
[30] | SIS HB 370 | Sakerhetsnorm for medicinska gasanlaggningar |
__________________________________________________________________________
УДК 615.835.3-78:006.354 ОКС 11.040.10 ОКП 94 5250
Ключевые слова: системы трубопроводные медицинских газов, концентрация кислорода, вакуум, медицинский воздух, давление
__________________________________________________________________________
Электронный текст документа
подготовлен АО "Кодекс" и сверен по:
официальное издание
М.: Стандартинформ, 2014