ГОСТ Р ИСО 5660-1-2020 Испытания по определению реакции на огонь. Интенсивности тепловыделения, дымообразования и потери массы. Часть 1. Определение интенсивности тепловыделения методом конического калориметра и интенсивности дымообразования измерениями в динамическом режиме

[1]

ISO 291:1997, Plastics - Standard atmospheres for conditioning and testing

[2]

ISO 5657:1997, Reaction to fire tests - Ignitability of building products using a radiant heat source

[3]

ISO 5725:1986, Precision of test methods - Determination of repeatability and reproducibility for a standard test method by inter-laboratory tests

[4]

ISO 5725-1:1994, Accuracy (trueness and precision) of measurement methods and results - Part 1: General principles and definitions

[5]

ISO 5725-2:1994, Accuracy (trueness and precision) of measurement methods and results - Part 2: Basic method for the determination of repeatability and reproducibility of a standard measurement method

[6]

ISO/TR 3814:1989, Tests for measuring "reaction-to-fire" of building materials - Their development and application

[7]

ISO/TS 14934-1, Fire tests - Calibration and use of heat flux meters - Part 1: General principles

[8]

ASTM E1354-99, Standard Test Method for Heat and Visible Smoke Release Rates for Materials and Products Using an Oxygen Consumption Calorimeter

[9]

ASTM E662, Standard Test Method for Specific Optical Density of Smoke Generated by Solid Materials

[10]

BS 6809: 1987, Method for calibration of radiometers for use in fire testing

[11]

BS 7904:1998, Guide to Smoke measurement units - Their basis and use in smoke capacity test methods

[12]

DIN 50055:1989, Light measuring system for testing smoke development

[13]

Babrauskas V. Development of the Cone calorimeter - A bench-scale heat release rate apparatus based on oxygen consumption, Fire and Materials, 8, 1984, pp.81-95

[14]

Twilley W.H., & Babrauskas V. User's guide for the Cone calorimeter, NBS Special Publication SP 745. National Bureau of Standards, U.S., 1988

[15]

Janssens M.L. Measuring rate of heat release by oxygen consumption, Fire Technology, 27, 1991, pp.234-249

[16]

Babrauskas V., & Grayson S.J. eds. Heat release in fires. Interscience Communications Ltd, London, 1992

[17]

B.A.-L., & Tsantaridis L.D. Smoke Production in the Cone Calorimeter and the Room Fire Test. Fire Saf. J. 1991, 17 pp.27-43

[18]

LAUREYS. K., SCHOONACKER F. Wentenschappelijke evaluatie van opaciteitsmeetsystemen voor pyrolyse en verbrandingsgassen. University of Gent Faculty of Applied Sciences, 1989 [Scientific Evaluation of Smoke Opacity Measuring Systems for Pyrolysis and Combustion Gases]

[19]

MARNIX SENNESAEL P. Wiskundige studie van het dynamisch gedrag van rookopaciteitsme etsystemen (Mathematical Study of the Dynamical Behaviour of Smoke Opacity measuring Systems). University of Gent Faculty of Applied Sciences, 1989

[20]

Chow W. K., & Lai K. F. Optical Measurement of Smoke, Fire and Materials, 16, 1992, pp.135-139

[21]

Mulholland G. How Well Are We Measuring Smoke?, Fire and Materials, 6, 1982, pp.65-67

[22]

Babrauskas V., & Wetterlund I. Choice of Optical Calibration Filters for Laser Photometers. Fire Saf. J. 1995, 24 pp.197-199

[23]

Babrauskas V., & Mulholland G. Smoke and Soot Data Determinations in the Cone Calorimeter, in Mathematical Modeling of Fires (ASTM STP 983), pp.83-104. American Society for Testing and Materials, Philadelphia 1987

[24]

Babrauskas V. The Cone Calorimeter (Section 3/Chapter 3), pp.3-37-3-52, in The SFPE Handbook of Fire Protection Engineering, Second Edition, National Fire Protection Association, Quincy, MA 1995

[25]

Marshall N.R., & Harrison R. Comparison of Smoke Particles Generated within a Small Scale Hood and Duct Smoke Test Apparatus with those in a Cumulative Apparatus, BRE Note N67/91. Fire Research Station. Borehamwood, 1991

[26]

, B Fire Safety of Upholstered Furniture - Final report on the CBUF (Combustion Behaviour of Upholstered Furniture), (Appendix A5), pp.307-325, Interscience Communications, London, UK

УДК 614.841.332:006.354

ОКС 13.220.50

Ключевые слова: реакция на огонь, интенсивность тепловыделения, интенсивность дымообразования, скорость потери массы образца, метод испытания, конический нагреватель, метод конического калориметра