ГОСТ Р 59995-2022 (ИСО 19901-4:2016) Нефтяная и газовая промышленность. Сооружения нефтегазопромысловые морские. Геотехнические и расчетные аспекты проектирования фундаментов

[1]

API RP 2GEO

Геотехнические аспекты и аспекты проектирования фундаментов, Рекомендованная практика 2GEO ANSI/API, Американский нефтяной институт, Вашингтон, округ Колумбия (Geotechnical and Foundation Design Considerations, ANSI/API Recommended Practice 2GEO, American Petroleum Institute, Washington DC)

[2]

Нормативный документ

НД N 2-020201-018

Правила классификации, постройки и оборудования морских плавучих нефтегазодобывающих комплексов (ПНК). Санкт-Петербург, Российский морской регистр судоходства, 2021

[3]

Нормативный документ

НД N 2-020201-015

Правила классификации, постройки и оборудования плавучих буровых установок (ПБУ) и морских стационарных платформ (МСП). Санкт-Петербург, Российский морской регистр судоходства, 2018

[4]

ИСО 19902:2020

Промышленность нефтяная и газовая. Стационарные стальные морские сооружения (Petroleum and natural gas industries - Fixed steel offshore structures)

[5]

ИСО 19903:2019

Промышленность нефтяная и газовая. Стационарные бетонные морские сооружения (Petroleum and natural gas industries - Fixed concrete offshore structures)

[6]

ИСО 19904

Промышленность нефтяная и газовая. Плавучие морские сооружения (Petroleum and natural gas industries - Floating offshore structures) (все части)

[7]

ИСО 19906:2019

Промышленность нефтяная и газовая. Арктические морские сооружения (Petroleum and natural gas industries - Arctic offshore structures)

[8]

ISO/TR 19905-2:2012

Промышленность нефтяная и газовая. Оценка передвижных морских оснований с учетом местных условий. Часть 2. Замечания по поводу самоподъемных оснований и подробные расчеты образца (Petroleum and natural gas industries - Site-specific assessment of mobile offshore units - Part 2: Jack-ups commentary and detailed sample calculation)

[9]

Tjelta T.I. Geotechnical aspects of bucket foundations replacing piles for the Europipe 16/11 jacket, Proc. Offshore Technology Conf., Houston, Texas, paper OTC 7379, May 1994

[10]

Leblanc C., Houlsby G.T., Byrne B.W. Response of stiff piles in sand to long-term cyclic lateral loading. Geotechnique. 2009, 60 (2) pp.79-90

[11]

Baecher G.B., Christian J.T. Reliability and Statistics in Geotechnical Engineering. John Wiley & Sons, 2003

[12]

Hicks M.A. An explanation of characteristic values of soil properties in Eurocode 7, Modern geotechnical design codes of practice: Implementation, application and development. IOS Press, 2012, pp.36-45

[13]

DNVGL Recommended Practice DNV-RP-C207. Statistical Representation of Soil Data, DNVGL A/S. , 2012

[14]

Lacasse S., Nadim E., Rahim A., Guttormsen T.R. Statistical description of characteristic soil properties, Proc. Offshore Technology Conf., Houston, Texas, paper OTC 19117, May 2007

[15]

Campbell K.J., Quiros Q.W., Young A.G., The Importance of Integrated Studies to Deepwater Site Investigation, Proc. 21st Offshore Technology Conf., Houston, Texas, paper OTC 5757, May 1988, p.99-107

[16]

Doyle E.H. The Usefulness of High Resolution Geophysical Surveying to the Offshore Oil and Gas Industry - Gulf of Mexico, Proc. UN Meeting on Marine Engineering Geological Surveys for Petroleum Development in Developing Countries, Guangzhou, People's Republic of China, November 30-December 6, 1989, p.1-10

[17]

Campbell K.J., Burrell R., Kucera M.S., Audibert J.M.E. Defining Fault Exclusion Zones at Proposed Suction-Anchor Sites Using an AUV Micro 3D Seismic Survey, Proc. Offshore Technology Conf., Houston, Texas, paper OTC 17669, May 2005

[18]

Audibert J.M.E., Humphrey G.D., Campbell K.J., Guion J. Assessment of the Effects of Faults Intersecting TLP Pile Foundations, A Case History Review, Proc. Intl. Seminar on Offshore and Polar Engineering, ISOPE, Toulon, France, 2004

[19]

Berger W.J., Lanier D.L., Jeanjean P. Geologic Setting of the Mad Dog Mooring System, Proc. Offshore Technology Conf., Houston, Texas, paper OTC 17914, May 2006

[20]

De Waal J.A., Smits R.M.M. Prediction of Reservoir Compaction and Surface Subsidence: Field Application of a New Model, Society of Petroleum Engineers, paper SPE 14124, Las Vegas, 1985

[21]

Abbs A.F., Needham A.D. Grouted Piles in Weak Carbonate Rocks, Proc. 17th Offshore Technology Conf., Houston, Texas, paper OTC 4852, May 1985

[22]

Angemeer J., Carlson E., Klick J.H. Techniques and Results of Offshore Pile Load Testing in Calcareous Soils, Proc. 5th Offshore Technology Conf., Houston, Texas, paper OTC 1894, May 1973

[23]

ARGEMA-CLAROM. Foundations in Carbonate Soils, Design Guide for Offshore Structures, Technip ed., 1994

[24]

Barthelemy H.C., Martin R., Le Tirant P.M., Nauroy J.F. Grouted Driven Piles: An Economic and Safe Alternate for Pile Foundations, Proc. 19th Offshore Technology Conf., Houston, Texas, paper OTC 5409, May 1987

[25]

Clark A.R., Walker B.F. A Proposed Scheme for the Classification and Nomenclature for Use in the Engineering Description of Middle Eastern Sedimentary Rocks. Geotechnique. 1977, 27 (1) pp.93-99

[26]

Datta M., Gulhati S.K., Rao G.V. Crushing of Calcareous Sands During Shear, Proc. 11th Offshore Technology Conf., Houston, Texas, paper OTC 3525, May 1979

[27]

Ping W.C.V., Locke G.E., De Mello J.R., De Matos S.F.D. Performance Assessment of Deep Penetration Offshore Piles Driven Into Calcareous Soils, Proc. 16th Offshore Technology Conf., Houston, Texas, paper OTC 4836, May 1984

[28]

Dutt R.N., Cheng A.P. Frictional Response of Piles in Calcareous Deposits, Proc. 16th Offshore Technology Conf., Houston, Texas, paper OTC 4838, May 1984

[29]

Dutt R.N., Ingram W.B. Significance of In-Situ and Laboratory Tests for Design of Foundations in Granular Carbonate Soils, Proc. 23rd Offshore Technology Conf., Houston, Texas, paper OTC 6515, May 1991

[30]

Dutt R.N., Moore J.E., Mudd R.W., Rees T.E. Behaviour of Piles in Granular Carbonate Sediments from Offshore Philippines, Proc. 17th Offshore Technology Conf., Houston, Texas, paper OTC 4849, May 1985

[31]

Finnie I.M.S., Randolph M.F. Punch-Through and liquefaction induced failure of shallow foundations on calcareous sediments, Proc. 7th Intl. Conf. on Behaviour of Off-Shore Structures BOSS'94, MIT, Boston, 1994, p.217-230

[32]

Finnie I.M.S., Randolph M.F. Bearing response of shallow foundations in uncemented calcareous soil, Proc. Intl. Conf. on Centrifuge Testing, Singapore, 1994, p.535-540

[33]

Fragio A.G, Santiago J.L., Sutton V.J.R. Load Tests on Grouted Piles in Rock, Proc. 17th Offshore Technology Conf., Houston, Texas, paper OTC 4851, May 1985

[34]

Gilchrist J.M. Load Tests on Tubular Piles in Coralline Strata. J. Geotech. Eng. 1985, 111 (5)

[35]

Gunasena U., Joer H.A., Randolph M.F. Design approach for grouted driven piles in calcareous soil, Proc. 27th Offshore Technology Conf., Houston, Texas, paper OTC 7669, May 1995

[36]

Murff J.D. Pile Capacity in Calcareous Sands: State-of-the-Art. J. Geotech. Eng. 1987 May, 113 (5)

[37]

Nauroy J.F., Brucy F., Le Tirant P. Static and Cyclic Load Tests on a Drilled and Grouted Pile in Calcareous Sands, Proc. 4th Intl. Conf. on Behaviour of Off-Shore Structures, BOSS'85, Delft, July 1985

[38]

Nauroy J.F., Le Tirant P. Model Tests of Piles in Calcareous Sands, Specialty Conf. on Geotechnical Practice in Offshore Engineering. ASCE, Austin, Texas, 1983

[39]

Poulos H.G., Uesugi M., Young G.S. Strength and Deformation Properties of Bass Strait Carbonate Sands, Geotechnical Engineering Journal, ASCE, 2 (2), 1982

[40]

Poulos H.G. Cyclic Degradation of Pile Performance in Calcareous Soils, Proc. Symp. on Analysis and Design of Pile Foundations, San Francicso, California, Joseph Ray Meyer (ed.), October 1984

[41]

Poulos H.G., Chua E.W. Bearing Capacity of Foundations on Calcareous Sand, Proc. 11th Intl. Conf. on Soil Mechanics and Foundation Engineering, ICSMFE, 3, San Francisco, California, 1985

[42]

Puech A., Bustamante M., Auperin L. Foundation Problems in Coral Soils: A Case History, The Oil Terminal of Mantanzas, Cuba, Proc. 22nd Offshore Technology Conf., Houston, Texas, paper OTC 6238, May 1990

[43]

Randolph M.F., Joer H.A., Khorshid M.S., Hyden A.M. Field and laboratory data from pile load tests in calcareous soil, Proc. 28th Offshore Technology Conf., Houston, Texas, paper OTC 7992, May, 1996

[44]

Peuchen J., De Ruijter M., Goedemoed S. Commercial Characterization of Calcareous Soils, Proc. 2nd Intl. Conf. on Engineering for Calcareous Sediments, Bahrain 1999, Al Shafei K.A. (ed.), A.A.Balkema, Rotterdam, 2000

[45]

Erbrich C.T. Australian Frontiers - Spudcans on the Edge, Proc. Intl. Symposium on Frontiers in Offshore Geotechnics, ISFOG, Perth, September 2005, p.49-74

[46]

Humpheson C. Foundation Design of Wandoo В Concrete Gravity Structure, Proc. Intl. Conf. on Offshore Site Investigation and Foundation Behaviour, SUT OSIF, London, 1998

[47]

Neubecker S.N., Erbrich C.T. Bayu Undan Substructure Foundations, Geotechnical Design and Analysis, Proc. Offshore Technology Conf., paper OTC 16157, Houston, Texas, May 2004

[48]

Randolph M.F., Erbrich C.T., Design of Shallow Foundations for Calcareous Sediments, Proc. 2nd Intl. Conf. on Engineering for Calcareous Sediments, Bahrain, February 1999, Al Shafei K.A. (ed.), A.A.Balkema, Rotterdam, 2000

[49]

Watson P.G., Humpheson C. Foundation design and installation of the Yolla A platform, Proc. 6th Intl. Conf. on Offshore Site Investigation and Geotechnics, SUT OSIG, London, 2007, p.399-412

[50]

Jeanjean P., Watson P.G., Kolk H.J., Lacasse S. RP2GEO: The new API recommended practice for geotechnical engineering, Proc. Offshore Technology Conf., Houston, Texas, paper OTC 20631, May 2010

[51]

Helfrich S.C., Young A.G., Ehlers C.J. Temporary Seafloor Support of Jacket Structures, Proc. 12th Offshore Technology Conf., Houston, Texas, paper OTC 3750, May 1980

[52]

Highter W.H., Anders J.C. Dimensioning Footings Subjected to Eccentric Loads. J. Geotech. Eng. 1985, 111 (GT5) pp.659-665

[53]

Gourvenec S., Steinepreis M. Undrained Limit States of Shallow Foundations Acting in Consort. Int. J. Geomech. 2007, 7(3) pp.194-205

[54]

Jostad H.P., Andersen K.H. Potential Benefits of Using Skirted Foundations for Jack-Up Platforms, Proc. Offshore Technology Conf., Houston, Texas, paper OTC 18016, May 2006

[55]

Ukritchon B., Whittle A.J., Sloan S.W. Undrained Limit Analysis for Combined Loading of Strip Footings on Clay. J. Geotech. Geoenviron. Eng. 1998, 124 (3) pp.265-276

[56]

Gourvenec S. Failure envelopes for offshore shallow foundation under general loading. Geotechnique. 2007, 57 (9) pp.715-727

[57]

Gourvenec S. Failure envelopes for offshore shallow foundation under general loading. Geotechnique. 2007, 57 (9) pp.715-727

[58]

Feng X., Randolph M.F., Gourvenec S., Wallerand R. Design approach for rectangular mudmats under fully three dimensional loading. Geotechnique. 2014, 64 (1) pp.51-63. DOI:10.1680/geot.13.P.051

[59]

Martin C.M. Vertical bearing capacity of skirted circular foundations on Tresca soil, Proc. 15th Intl. Conf. on Soil Mechanics and Geotechnical Engineering, ICSMGE, Istanbul, 2001, 1, p.743-746

[60]

Hu Y., Randolph M.F. Bearing Capacity of Caisson Foundations on Normally Consolidated Clay. Soil Found. 2002, 42 (5) pp.71-77

[61]

Houlsby G.T., Martin C.M. Undrained bearing capacity factors for conical footings on clay. Geotechnique. 2003, 53 (5) pp.513-520

[62]

Salgado R., Lyamin A.V., Sloan S.W., Yu H.S. Two- and three-dimensional bearing capacity of foundations in clay. Geotechnique. 2004, 54 (5) pp.297-306

[63]

Gourvenec S., Randolph M.F., Kingsnorth O. Undrained bearing capacity of square and rectangular footings. Int. J. Geomech. 2006, 6 (3) pp.147-157

[64]

Gourvenec, S., Mana D.K.S., Undrained vertical bearing capacity factors for shallow foundations, Letters, doi: 10.1680/geolett.11.00026, 2011

[65]

Bransby M., Randolph M.F. Combined loading of skirted foundations. Geotechnique. 1998, 48 (5) pp.637-655

[66]

Bransby M., Randolph M.F. The effect of embedment depth on the undrained response of skirted foundations to combined loading, Soils and Foundations. JGS. 1999, 39 (4) pp.19-33

[67]

Randolph M.F., Puzrin A.M. Upper bound limit analysis of circular foundations on clay under general loading. Geotechnique. 2003, 53 (9) pp.785-796

[68]

Gourvenec S. Effect of embedment on the undrained capacity of shallow foundations under general loading. Geotechnique. 2008, 58 (3) pp.177-185

[69]

Gourvenec S., Barnett S. Undrained failure envelope for skirted foundations under general loading. Geotechnique. 2011, 61 (3) pp.263-270. DOI:10.1680/geot.9.T027

[70]

Vulpe, C., Gourvenec, S., Power M., A generalized failure envelope for undrained capacity of circular shallow foundations under general loading,  Letters, Vol 4, Issue July - September 2014, doi 10.1680/geolett.14.00010, 2014

[71]

Gourvenec S. Shape effects on capacity of rectangular footings under combined load. Geotechnique. 2007, 57 (8) pp.637-646

[72]

Taiebat H.A., Carter J.P. A failure surface for circular footings on cohesive soils. Geotechnique. 2010, 60 (4) pp.265-273

[73]

Taiebat H.A., Carter J.P. Numerical studies of the bearing capacity of shallow foundations on cohesive soil subjected to combined loading. Geotechnique. 2000, 50 (4) pp.409-418

[74]

Bransby M.F., Yun G. The undrained capacity of skirted strip foundations under combined loading. Geotechnique. 2009, 59 (2) pp.115-125

[75]

Mana D.K.S., Gourvenec S., Martin C.M. Critical skirt spacing for shallow foundations under general loading. J. Geotech. Geoenviron. Eng. 2013, 139 (9) pp.1554-1566. DOI:10.1061/(ASCE)GT.1943-5606.0000882

[76]

Feng X., Gourvenec S. Optimal shear key interval for offshore shallow foundations, Proc 32nd Intl. Conference on Ocean and Arctic Engineering, OMAE, Nantes, 2013

[77]

Yun G., Bransby M.F. The horizontal-moment capacity of embedded foundation in undrained soil. Can. Geotech. J. 2007, 44 pp.409-424

[78]

Butterfield R., Gottardi G. A complete three dimensional failure envelope for shallow footings on sand. Geotechnique. 1994, 44 (1) pp.181-184

[79]

Byrne B.W., Houlsby G.T. Observation of footing behaviour on loose carbonate sand. Geotechnique. 2001, 51 (5) pp.463-466

[80]

Tan F.S. Centrifuge and theoretical modelling of conical footings on sand, Ph.D. Thesis, University of Cambridge, UK, 1990

[81]

Dean E.T.R., James R.G., Schofield A.N., Tan F.S.C., Tsukamoto Y. The bearing capacity of conical footing on sand in relation to the behaviour of spudcan footing of jack-ups, Proc. Wroth Memorial Symposium: Predictive Soil Mechanics, Oxford, UK, 1992, p.230-253

[82]

Montrasio L., Nova R. Settlements of shallow foundations on sand; geometrical effects. Geotechnique. 1997, 47 (1) pp.49-60

[83]

Andersen K.H., Lauritzsen R. Bearing capacity for foundation with cyclic loads. J. Geotech. Eng. 1988, 114 (GT5) pp.540-555

[84]

Andersen K.H., Allard M.A., Hermstad J. Centrifuge model tests of a gravity platform on very dense sand. II: Interpretation, Proc. 7th Intl. Conf. on Behaviour of Off-Shore Structures, BOSS'94, MIT, Boston, 1994, 1, p.255-282

[85]

Andersen K.H. Bearing capacity under cyclic loading - Offshore, along the coast and on land, The 21st Bjerrum Lecture, Oslo, 23 Nov. 2007. Can. Geotech. J. 2009, 46 pp.513-535

[86]

Andersen K.H. Foundation design of offshore gravity structures, Chapter 4 in Cyclic Loading of Soils. From Theory to Design, M.P.O'Reilly and S.F.Brown (eds.), Blackie and Son, 1991

[87]

Brinch-Hansen J. A revised and extended formula for bearing capacity, The Danish Geotechnical Institute, Bulletin No. 2, Copenhagen, 1970

[88]

Davis E.H., Booker J.R. The Effect of Increasing Strength with Depth on the Bearing Capacity of Clays. Geotechnique. 1973, 23 (4) pp.551-563

[89]

Matar M., J. portante d'une semelle filante sur sol purement d'epaisseur et de variable avec la profondeur. Revue de . 1977, 1 pp.37-52

[90]

J., Matar M. portante des fondations superficielles circulaires. Journal de et . 1982, 1 (2) pp.237-267

[91]

Foundations D.N.V.G.L. Classification Note No. 30.4, DNVGL A/S. , 1992, pp.54.

[92]

Prandtl, L., Eindringungsfestigkeit und Festigkeit von Schneiden, Angew. Math. U. Mech, 1 (15), 1920

[93]

Терцаги К. Теория механики грунтов, М., 1961

[94]

Martin C.M. New Software for Rigorous Bearing Capacity Calculations, Proc. Intl. Conf. on Foundations, Dundee, UK, 2003, p.581-592

[95]

Schofield, A.N., Interlocking, and Peak and Design Strengths, , 56 (5), 2006, p.357-358; Discussions and response in , 58 (6), 2008, p.527-532

[96]

Finnie I.M.S., Morgan N. Torsional Loading of Subsea Structures, Proc. 14th Intl. Offshore and Polar Engineering Conf., ISOPE, Toulon, France, 2004

[97]

Cassidy M.J., Cheong J. The behaviour of circular footings on sand subjected to combined vertical-torsion loading, Intl. Journal of Physical Modelling in Geotechnics. 2005, 5 (4) pp.1-14

[98]

Poulos H.G., Davis E.H. Elastic Solutions for Soil and Rock Mechanics. John Wiley & Sons, 1974

[99]

Doherty J.P., Deeks A.J. Elastic response of circular footings embedded in a non-homogeneous half-space. Geotechnique. 2003, 53 (8) pp.703-714

[100]

Holtz R.D. In: Stress Distribution and Settlement of Shallow Foundations, Foundation Engineering Handbook. (Fang H.Y., ed.). Kluwer Academic Publishers Group, Second Edition, 1991

[101]

Gourvenec S., Randolph M.F., Consolidation beneath skirted foundations due to sustained loading, Int. Journal of Geomechanics, January/February, 10 (1), 2010, p.22-29

[102]

Gourvenec S., Randolph M.F. Effect of foundation embedment and soil properties on consolidation response, Proc. Int. Conf. on Soil Mechanics and Geotechnical Engineering, ICSMGE, Alexandria, Egypt, 2009, p.638-641

[103]

Andersen K.H., Hoeg K. Deformations of soils and displacements of structures subjected to combined static and cyclic loads, Proc. Xth European Conf. on Soil Mechanics and Foundation Engineering, ECSMFE, Firenze, 4, 1991, p.1147-1158

[104]

API RP 2A, Recommended Practice for Planning, Designing and Constructing Fixed Offshore Platforms - Working Stress Design, American Petroleum Institute, Washington DC (Рекомендованная практика по планированию, проектированию и строительству стационарных морских платформ - Расчет по допустимым напряжениям, Американский нефтяной институт, Вашингтон, округ Колумбия)

[105]

Murff J.D. Pile capacity in a softening soil. Int. J. Numer. Anal. Methods Geomech. 1980 April-June, 4 (2) pp.185-189

[106]

Randolph M.F. Design considerations for offshore piles, Proc. Intl. Conf. on Geotechnical Practice in Offshore Engineering, Austin, Texas, ASCE, April 27-29, 1983, p.422-439

[107]

Tomlinson M.J. Pile Design and Construction Practice. E. and F.N. Spon, Fourth Edition, 1994

[108]

Kraft L.M., Focht J.A., Amarasinghe S.F. Friction capacity of piles driven into clay. J. Geotech. Eng. Div. 1981 November, 107 (GT11) pp.1521-1541

[109]

Semple R.M., Rigden W.J. Shaft capacity of driven pipe piles in clay, Proc. Intl. Symposium on Analysis and Design of Pile Foundations, San Francisco, ASCE, October 1984. P.59-79

[110]

Randolph M.F., Murphy B.S. Shaft capacity of driven piles in clay, Proc. 17th Offshore Technology Conf., Houston, Texas, paper OTC 4883, May 1985

[111]

Pelletier J.H., Murff J.D., Young A.C. Historical development and assessment of current API design methods for axially loaded piles, Proc. 27th Offshore Technology Conf., Houston, Texas, paper OTC 7157, May 1993

[112]

Kolk H.J., Van Der Velde E. A reliable method to determine friction capacity of piles driven into clays, Proc. 28th Offshore Technology Conf., Houston, Texas, paper OTC 7993, May 1996

[113]

Olson, R.E., Analysis of Pile Response Under Axial Loads, Report to API, December 1984

[114]

Clarke J., ed. Large-Scale Pile Tests in Clay. Thomas Telford Publ, London, UK, 1993

[115]

Kraft L.M., Lyons C.G. State of the art: Ultimate axial capacity of grouted piles, Proc. 6th Offshore Technology Conf., Houston, Texas, paper OTC 2081, May 1974

[116]

O'Neill M.W., Hassan K.M. Drilled Shafts: Effects of Construction on Performance and Design Criteria, Proc. Intl. Conf. on Design and Construction of Deep Foundations, U.S. Federal Highway Administration, FHWA, 1, 1994, p.137-187

[117]

Coyle H.M., Reese L.C. Load transfer for axially loaded piles in clay. J. Soil Mech. Found. Div. 1966 March, 92 (SM2) pp.1-26

[118]

Ladd C.C., Foott R. New Design Procedure for Stability of Soft Clays. J. Geotech. Eng. Div. 1974 July, 100 (7) pp.763-786

[119]

Ladd C.C., Foott R., Ishihara K., Schlosser F., Poulos H.G. Stress Deformation and Strength Characteristics, State-of-the-Art Report, Proc. IX Intl. Conf. on Soil Mechanics and Foundation Engineering, ICSMFE, Tokyo, 2, 1977, p.421-494

[120]

Bogard J.D., Matlock H. Applications of model pile tests to axial pile design, Proc. 22nd Offshore Technology Conf., Houston, Texas, paper OTC 6376, May 1990

[121]

Lehane B.M., Jardine R.J. Displacement pile behaviour in glacial clay. Can. Geotech. J. 1994, 31 (1) pp.79-90

[122]

Miller T.W., Murff J.D., Kraft L.M. Critical state soil mechanics model of soil consolidation stresses around a driven pile, Proc. 10th Offshore Technology Conf., Houston, Texas, paper OTC 3307, May 1978

[123]

Randolph M.F., Wroth C.P. An analytical solution for the consolidation around a driven pile. Int. J. Numer. Anal. Methods Geomech. 1979 July-September, 3 (3) pp.217-230

[124]

Bond A.J., Jardine R.J. Shaft capacity of displacement piles in a high OCR clay. Geotechnique. 1995 March, 45 (1) pp.3-23

[125]

O'Neill M.W., Hawkins R.A., Audibert J.M.E. Installation of pile group in overconsolidated clay. J. Geotech. Eng. Div. 1982 Nov., 108 (GT11) pp.1369-1386

[126]

Overy R. The Use of ICP Design Methods for the Foundations of Nine Platforms Installed in the UK North Sea, Proc. 6th Intl. Conf. on Offshore Site Investigations and Geotechnics, SUT OSIG, September 2007, London, UK, p.359-366

[127]

Yang Z.X., Jardine R., Guo W.B., Chow F. A new and openly accessible database of tests on piles driven in sands. Letters. 2015, 5 pp.12-20. DOI:10.1680/geolett.14.00075

[128]

Xu X., Schneider J.A., Lehane B.M. Cone penetration test (CPT) methods for end-bearing assessment of open-and closed-ended driven piles in siliceous sand. Can. Geotech. J. 2008, 45 pp.1130-1141

[129]

Schneider J.A., Xu X., Lehane B.M. Database assessment of CPT-based methods for axial capacity of driven piles in siliceous sand. J. Geotech. Geoenviron. Eng. 2008, 134 (9) pp.1227-1244

[130]

Olson R.E. Comparison of Measured and Axial Load Capacities of Steel Pipe Piles in Sand with Capacities Calculated Using the 1986 API RP2A Standard, Final Report to API, December 1987

[131]

Fugro. Axial Pile Capacity Design Method for Offshore Driven Piles in Sand, Fugro Engineers BV Report No. P1003 to API, Issue 3, 5 August 2004

[132]

Lehane B.M., Schneider J.A., Xu, X., A review of design methods for offshore driven piles in siliceous sand, UWA Report No. GEO: 05358, Univ. of Western Australia, Perth, September 2005

[133]

Lehane B.M., Schneider J.A., Xu X. The UWA-05 method for prediction of axial capacity of driven piles in sand, Proc. 1st Intl. Symposium on Frontiers in Offshore Geotechnics, ISFOG, Perth, September 2005, p.683-689

[134]

Kolk H.J., Baaijens A.E., Senders M. Design criteria for pipe piles in silica sands, Proc. 1st Intl. Symposium on Frontiers in Offshore Geotechnics, ISFOG, Perth, Sept. 2005, p.711-716

[135]

Clausen C.J.F., Aas P.M., Karlsrud K. Bearing Capacity of Driven Piles in Sand, the NGI Approach, Proc. 1st Intl. Symposium on Frontiers in Offshore Geotechnics, ISFOG, Perth, September 2005, p.677-682

[136]

Jardine R., Chow F., Overy R., Standing J. ICP design methods for driven piles in sands and clays, Imperial College, Thomas Telford Publ., London, 2005

[137]

CUR Report. Bearing Capacity of Steel Pipe Piles, Centre for Civil Engineering Research and Codes, Gouda, August 2001

[138]

Randolph M.F., Leong E.C., Houlsby G.T. One-dimensional analysis of soil plugs in pipe piles. Geotechnique. 1991, 61 (4) pp.587-598

[139]

Lehane B.M., Randolph M.F. Evaluation of a Minimum Base Resistance for Driven Pipe Piles in Siliceous Sand. J. Geotech. Geoenviron. Eng. 2002, 128 (3) pp.198-205

[140]

Jamiolkowski M., Ghionna V.N., Lancellotta R., Pasqualini E. New Correlations of Penetration Tests for Design Practice, Proc. Intl. Symposium on Penetration Testing, ISOPT-1, Orlando, 20-24 March 1988, De Ruiter J. (ed.), A.A. Balkema, Rotterdam, 1, p.263-296

[141]

Jamiolkowski M., Lo Presti D.C.F., Manassero M. Evaluation of Relative Density and Shear Strength of Sands from CPT and DMT, Proc. Intl. Symposium on Soil Behaviour and Soft Ground Construction, 5-6 October 2003, Cambridge, Mass., Geotechnical Special Publication No. 119, ASCE, p.201-238

[142]

Youd T.L., Idriss I.M., Andrus R.D., Arango I., Castro G., Christian J.T. et al. Liquefaction resistance of soils: summary report from the 1996 NCEER and 1998 NCEER/NSF workshops on evaluation of liquefaction resistance of soils. J. Geotech. Geoenviron. Eng. 2001 Oct., 127 (10) pp.817-833

[143]

Lunne T., Robertson P.K., Powell J.J.M. Cone Penetration Testing in Geotechnical Practice. Blackie Academic & Professional, 1997

[144]

Thompson G.W.L., Jardine R.J. The Applicability of the New Imperial College Design Method to Calcareous Sands, Proc. Intl. Conf. on Offshore Site Investigations and Foundation Behaviour, Society for Underwater Technology, SUT, London, 1998, p.383-400

[145]

Kolk H.J. Deep Foundations in Calcareous Sediments, Proc. 2nd Intl. Conf. on Engineering for Calcareous Sediments, Bahrain, February 1999, 2, Al Shafei K.A. (ed.), A.A. Balkema, Rotterdam, 2000, p.313-344

[146]

Fugro. Foundation Design - Bridge Piles, Jamuna Bridge, Bangladesh, Fugro Engineers BV, Final Report No. K-2380/120 to HDEC, June 1995

[147]

Whitehouse R. Scour at Marine Structures. Thomas Telford Publ, London, UK, 1998

[148]

NEN 6743, Calculation Method for Bearing Capacity of Pile Foundation, Compression Piles, Nederlandse Normalisatie Instituut, Geotechnics, September 2003

[149]

Focht J.A., Kraft L.M. Axial performance and capacity of piles. In: Planning and Design of Fixed Offshore Platforms, (McClelland B., Reifel M.D., eds.). Van Nostrand Reinhold Comp, New York, 1986, pp.763-800.

[150]

Bea R.G. Dynamic Response of Marine Foundations, Proc. Intl. Symposium Ocean Structural Dynamics '84, Corvallis Oregon, Oregon State University, 11-13 September 1984

[151]

Briaud J.-L., Felio G., Tucker L. Influence of Cyclic Loading on Axially Loaded Piles in Clay, Research Report API PRAC 83-42, Phase 2, Pile Response to Static and Dynamic Loads, December 1984

[152]

Briaud J.-L., Garland E. Influence of Loading Rate on Axially Loaded Piles in Clay, Research Report API PRAC 83-42, Phase 1, Pile Response to Static and Dynamic Loads, March 1984

[153]

Chen J-Y., Matarek B.A., Carpenter J.F., Young A., Gilbert R.B., Puskar F. and Verret S., Analysis of Potential Conservatism in Foundation Design for Offshore Platform Assessment, Offshore Technology Research Centre Report to the MMS and API, OTRC Library Number 8/09B198, September 2009

[154]

ASCE Panel on Offshore Platforms. Engineering Fixed Offshore Platforms to Resist Earthquakes, Specialty Conf. on Earthquake Engineering and Soil Dynamics, Geotechnical Engineering Division, 19-21 June 1978

[155]

Jardine R.J., Andersen K., Puech A. Cyclic loading of offshore piles: potential effects and practical design, Keynote Paper, Proc. SUT Conf. on Offshore Site Investigations and Geotechnics, OSIG, London, September 2012

[156]

Andersen K.H., Puech A.A., Jardine R.J. Cyclic resistant geotechnical design and parameters selection for offshore engineering and other applications, Proc. of ISSMGE Technical Committee TC 209 Workshop, Intl. Conf. on Soil Mechanics and Geotechnical Engineering, ICSMGE, Paris, 4 September 2013

[157]

Matlock H., Foo S.H.C. Axial analysis of piles using a hysteretic and degrading soil model, Proc. Intl. Conf. on Numerical Methods in Offshore Piling, London, Institution of Civil Engineers, ICE, 1980, p.127-133

[158]

Poulos H.G. Cyclic axial pile response-alternative analyses, Proc. Intl. Conf. on Geotechnical Practice in Offshore Engineering, Austin, Texas, ASCE, 1983, p.403-421

[159]

Karlsrud K., Nadim F., Haugen T. Piles in clay under cyclic axial loading. Field tests and computational modelling, Proc. 3rd Intl. Conf. on Numerical Methods in Offshore Piling, Nantes, France, 1986, Editions Technip, p.165-190

[160]

Bea R.G., Litton R.W., Nour-Omid S., Chang J.Y., Vaish A.K. A specialized design and research tool for the modelling of near-field pile-soil interactions, Proc. 16th Offshore Technology Conf., paper OTC 4806, Houston, Texas, May 1984

[161]

Novak M., Sharnouby B.E. Stiffness Constants of Single Piles. J. Geotech. Eng. Div 1983 July, 109 (7) pp.961-974

[162]

Roesset J.M., Angelides C. Dynamic stiffness of piles, Proc. Intl. Conf. on Numerical Methods in Offshore Piling, London, U.K., Institution of Civil Engineers, ICE, 1980, p.75-81

[163]

Lysmer J. Analytical Procedures in Soil Dynamics, Report No. UCB/EERC-79/29 presented at the ASCE Geotechnical Engineering Division Specialty Conf. on Earthquake Engineering and Soil Dynamics, Pasadena, California, December 1978

[164]

McClelland B., Ehlers C.J. Offshore Geotechnical Site Investigations. Planning and Design of Fixed Offshore Platforms, B. McClelland, and M.D. Reifel (eds.), Van Nostrand Reinhold Comp., New York, 1986, p.224-265

[165]

Wood D.M. In: Laboratory Investigations of the Behaviour of Soils under Cyclic Loading: A Review, Soil Mechanics - Transient and Cyclic Loads. (Pande G.N., Zienkiewicz O.C., eds.). John Wiley & Sons, New York, Chapter 20. 1982

[166]

Bogard J.D., Matlock H., Audibert J.M.E., Bamford S.R. Three years' experience with model pile segment tool tests, Proc. 17th Offshore Technology Conf., paper OTC 4848, Houston, Texas, May 1985

[167]

Pelletier J.H., Doyle E.H. Tension Capacity in Silty Clays - Beta Pile Test, Proc. 2nd Intl. Conf. on Numerical Methods in Offshore Piling, Austin, Texas, 1982, p.163-181

[168]

McAnoy R.P.L., Cashman A.C., Purvis O. Cyclic Tensile Testing of a Pile in Glacial Till, Proc. 2nd Intl. Conf. on Numerical Methods in Offshore Piling, Austin, Texas, 1982, p.257-291

[169]

Gallagher K.A., St. John H.D. Field Scale Model Studies of Piles as Anchorages for Buoyant Platforms, Proc. European Offshore Petroleum Conf., paper EUR 135, London, U.K., 1980

[170]

Ove ARUP & Partners. Research on the Behaviour of Piles as Anchors for Buoyant Structures - Summary Report, Offshore Technology Report OTH 86 215. Department of Energy, London, UK, 1986

[171]

Pelletier J.H., Sgouros G.E. Shear Transfer Behaviour of a 30-inch Pile in Silty Clay, Proc. 19th Offshore Technology Conf., paper OTC 5407, Houston, Texas, April 1987

[172]

Bea R.G., Vahdani S., Guttman S.I., Meith R.M., Paulson S.F. Analysis of the Performance of Piles in Silica Sands and Carbonate Formations, Proc. 18th Offshore Technology Conf., paper OTC 5145, Houston, Texas, May 1986

[173]

Coyle H.M., Suliaman I.H. Skin friction for steel piles in sand. J. Soil Mech. Found. Div. 1967 November, 93 (SM6) pp.261-278

[174]

Vijayvergiya V.N. Load movement characteristics of piles, Proc. Intl. Conf. of the Ports '77, American Society of Civil Engineers, ASCE, 2, 1977, p.269-284

[175]

Reese L.C., O'Neill M., Criteria for Design of Axially Loaded Drilled Shafts, Centre for Highway Research Report, University of Texas, August 1971

[176]

Matlock H. Correlations for Design of Laterally Loaded Piles in Soft Clay, Proc. 2nd Offshore Technology Conf., paper OTC 1204, Houston, Texas, April 1970

[177]

Reese L.C., Cox W.R. Field Testing and Analysis of Laterally Loaded Piles in Stiff Clay, Proc. 5th Offshore Technology Conf., paper OTC 2312, Houston, Texas, April 1975

[178]

Battacharya S., Carrington T.M., Aldridge T.R. Design of FPSO Piles Against Storm Loading, Proc. Offshore Technology Conf., paper OTC 17861, Houston, Texas, May 2006

[179]

O'Neill M.W., Murchison J.M., An Evaluation of p-y Relationships in Sands, Research Report No GT-DF02-83, API PRAC 82-41-1, University of Houston, Texas, March 1983

[180]

Georgiadis M. Development of p-y Curves for Layered Soils, Proc. Intl. Conf. on Geotechnical Practice in Offshore Engineering, ASCE, Austin, Texas, 1983, p.536-545

[181]

Poulos H.G., Randolph M.F. Pile Group Analysis: A Study of Two Methods. J. Geotech. Eng. Div. 1983, 109 (3) pp.335-372

[182]

Focht J.A., Koch K.H. Rational Analysis of the Lateral Performance of Offshore Pile Groups, Proc. 5th Offshore Technology Conf., Houston, Texas, paper OTC 1896, May 1973

[183]

O'Neill M.W. Group Action in Offshore Piles, Proc. Intl. Conf. on Geotechnical Practice in Offshore Engineering, ASCE, Austin, Texas, 1983, p.25-64

[184]

O'Neill M.W., Dunnavant T.W. An evaluation of the behaviour and analysis of laterally loaded pile groups, Research Report No. UHCE 85-11, API, PRAC 84-52, University of Houston. Department of Civil Engineering, University Park, 1985

[185]

Reese L.C., Wright S.G., Aurora R.P. Analysis of a pile group under lateral loading, in Laterally Loaded Deep Foundations: Analysis and Performance, Special Technical Publication. ASTM Spec. Tech. Publ. 1984, 835 pp.56-71

[186]

Jonker G., Middendorp P. Subsea Installations Using Vibratory Piling Hammers, Proc. Offshore Technology Conf., paper OTC 5776, Houston, Texas, May 1988

[187]

Smith E.A.L., Pile Driving Analysis by the Wave Equation, Journal of Soil Mechanics and Foundation Design, ASCE, 86, August, 1960

[188]

Gibson G., Coyte H.M. Soil Damping Constants Related to Common Soil Properties in Sand and Clays, Texas Transportation Institute, Report no. 125-1, Texas A&M Univ., College Station, 1968

[189]

Toolan F.E., Fox D.A. Geotechnical Planning of Piled Foundations for Offshore Platforms, Proc. Institution of Civil Engineers, Part 1. ICE, London, U.K., 1977, pp.221-4.

[190]

Heerema E.P., Relationship between wall friction, displacement and horizontal stress in clay and sand for pile drivability analysis, Ground Engineering (12)1, January 1979

[191]

Roussel H.J. Pile Driving Analysis of Large Diameter High Capacity Offshore Pipe Piles, Ph.D. Thesis, Tulane University, March 1979

[192]

Heerema E.P., Dynamic point resistance in sand and clay for pile drivability analysis, Ground Engineering (14) 6, 1981

[193]

Semple R.S., Gemeinhardt J.P. Stress History Approach to Analysis of Soil Resistance to Pile Driving, Proc. 14th Offshore Technology Conf., paper OTC 3869, Houston, Texas, May 1981

[194]

Stevens R.S., Wiltsie E.A., Turton T.H. Evaluating Pile Drivability for Hard Clay, Very Dense Sand and Rock, Proc. 15th Offshore Technology Conf., paper OTC 4205, Houston, Texas, May 1982

[195]

Zandwijk C.J., Voeten J.A.J., Heerema E.P. An Improved Pile Drivability Theory for Gulf of Mexico Soils, Proc. 16th Offshore Technology Conf., paper OTC 4503, Houston, Texas, May 1983

[196]

Dolwin J., Khorshid M.S., Van Goudoever P. Evaluation of driven pile capacity - Methods and results, Proc. Intl. Conf. on Engineering for Calcareous Sediments, 2, Perth, 15-18 March 1988, A.A. Balkema, Rotterdam, p.409-428

[197]

Hussein M., Rausche F., Likins G. Bearing Capacity of Piles and Conductors by Dynamic Analyses, Proc. Intl. Conf. on Engineering for Calcareous Sediments, 2, Perth, 15-18 March 1988, A.A. Balkema, Rotterdam, p.439-447

[198]

Puech A., Poulet D., Boisard P. A Procedure to Evaluate Pile Drivability Analysis in the Difficult Soil Conditions of the Southern Partofthe Gulf of Guinea, Proc. Offshore Technology Conf., paper OTC 8237, Houston, Texas, May 1990

[199]

Randolph M.F. Analysis of Stress-Wave Data from Pile tests at Pentre and Tilbrook, Proc. Intl. Conf. on Large-Scale Pile Tests in Clay, June 1992, Clarke J. (ed.), Thomas Telford, London, p.436-453

[200]

Brucy F., Meunier J. Pile Resistance at a Dense Sand Site, Proc. Intl. Conf. on Application of Stress Wave Theory to Piles, The Hague, September 1992, p.69-76

[201]

Mello J.R.C., Galgoul N.S. Piling and Monitoring of Large Diameter Closed-Toe Pipe Piles, Proc. Intl. Conf. on Application of Stress Wave Theory to Piles, The Hague, Sept. 1992, p.443-448

[202]

Colliat J.L., Vergobbi P., Puech A. Friction Degradation and Set-Up in Hard Clays Offshore Congo and Angola, Proc. Offshore Technology Conf., Houston, Texas, OTC paper 7192, Houston, Texas, May 1993

[203]

Doyle E.H. Pile Installation Performance for Four TLP's in the Gulf of Mexico, Proc. 31st Annual Offshore Technology Conf., OTC paper 10826, Houston, Texas, May 1999

[204]

Dutt R.N., Doyle E.H., Collins J.T., Ganguly P.A. Simple Model to Predict Soil Resistance to Driving for Long Piles in Deepwater Normally Consolidated Clays, Proc. Offshore Technology Conf., paper OTC 7668, Houston, Texas, May 1995

[205]

Aim T., Hamre L. Soil Model for Pile Driveability Predictions Based on CPT Interpretations, Proc. Intl. Conf. on Soil Mechanics and Geotechnical Engineering, ICSMGE, Istanbul, June 2001

[206]

Evans T.G., Finnie E., Little R., Jardine R., Aldridge T.R. BP Clair Phase 1 - Geotechnical Assurance of Driven Piled Foundations in Extremely Hard Till, Proc. 2nd Intl. Symposium on Frontiers in Offshore Geotechnics, ISFOG II, Perth, Australia, November 2010

[207]

Stevens R.F., Wiltsie E.A., Middlebrooks B.S. Controlled Hard Driving, Proc. 2nd Intl. Conf. on Application of Stress-Wave Theory on Piles, Stockholm, May 1984

[208]

Wiltsie E.A., Stevens R.F., Vines W.R. Pile Installation Acceptance in Strong Soils, Proc. 2nd Intl. Conf. on Application of Stress-Wave Theory on Piles, Stockholm, May 1984

[209]

Tisseau E., Jaeck C., Cathie D. Controlling Conductor Deviation with Inclined Driving Shoe, Proc. Intl. Conf. on Offshore Site Investigation and Geotechnics, SUT OSIG, London, U.K., Sept. 2007

[210]

Jeanjean P. Innovative Design Method for Deepwater Surface Casings, Proc. Society of Petroleum Engineers Technical Conf., paper SPE 77357, San Antonio, Texas, October 2002

[211]

Evans T.G., Feyereisen S., Rheaume G. Axial Capacities of Jetted Well Conductors in Angola, Proc. Intl. Conf. on Offshore Site Investigation and Geotechnics, SUT OSIG, London, U.K., November 2002

[212]

ИСО 13628 (все части)

Промышленность нефтяная и газовая. Проектирование и эксплуатация подводных добычных систем (Petroleum and natural gas industries. Design and operation of subsea production systems)

[213]

Bridge C. Effects of Seabed Interaction on Steel Catenary Risers, Ph.D. Thesis, University of Surrey, U.K., 2005

[214]

DNVGL Recommended Practice DNVGL-RP-0005. Fatigue Design of Offshore Steel Structures, DNVGL A/S. , 2005

[215]

Bridge C., Laver K., Clukey E., Evans T. Steel Catenary Riser Touchdown Point Vertical Interaction Model, Proc. Offshore Technology Conf., Houston, Texas, paper OTC 16628, May 2004

[216]

Aubeny C.P., Shi H., Murff J.D. Collapse Load for Cylinder Embedded in Trench in Cohesive Soil. Int. J. Geomech. 2005, 5 (4) pp.320-325

[217]

Randolph M.F., White D.J. Pipeline Embedment in Deep Water: Processes and Quantitative Assessment, Proc. Offshore Technology Conf., paper OTC 19128, Houston, Texas, May 2008

[218]

Colliat J.-L., Dendani H., Puech A., Nauroy J.-F. Gulf of Guinea Deepwater Sediments: Geotechnical Properties, Design Issues and Installation Experiences, Proc. 2nd Intl. Symposium on Frontiers in Offshore Geotechnics, ISFOG II, Perth, November 2010

[219]

Audibert J.M.E., Nyman D.J., O'Rourke T.D. Differential Ground Movement Effects on Buried Pipelines, Chapter 5 in Guidelines for the Seismic Design of Oil and Gas Pipeline Systems, prepared by the Committee on Gas and Liquid Fuel Pipelines of the ASCE Council on Lifeline Earthquake Engineering, 1984

[220]

Clukey E.C., Haustermans L., Dyvik R. Model Tests to Simulate Riser-Soil Interaction Effects in Touchdown Point Region, Proc. Intl. Symposium on Frontiers in Offshore Geotechnics, ISFOG, Perth, Australia, September 2005, p.651-658

[221]

Thethi R., Moros T. Soil Interaction Effects on Simple Catenary Riser Response, Proc. Intl. Conf. on Deepwater Pipeline & Riser Technology, Houston, Texas, 2001

[222]

Clukey E.C., Young A.G., Garmon G.S., Dobias J.R. Soil Response and Stiffness Laboratory Measurements of SCR Pipe/Soil Interaction, Proc. Offshore Technology Conf., paper OTC 19303, Houston, Texas, May 2008

[223]

Bridge C.D., Howells H.A. Observations and Modeling of Steel Catenary Riser Trenches, Proc. 17th Intl. Seminar on Offshore and Polar Engineering, ISOPE, Lisbon, paper ISOPE-2007-468, July 2007

[224]

Zakeri A., Clukey E., Kebadze B., Jeanjean P., Walker D., Piercey G. et al. Recent Advances in Soil Response Modeling for Well Conductor Fatigue Analysis and Development of New Approaches, Proc. Offshore Technology Conf., paper OTC 25795-MS, Houston, Texas, May 2015

[225]

Kramer S.L. Geotechnical Earthquake Engineering Book. Prentice Hall, 1996, pp.653

[226]

Andersen K.H. Cyclic Clay Data for Foundation Design of Structures Subjected to Wave Loading, Proc. Intl. Conf. on Cyclic Behaviour of Soils and Liquefaction Phenomena, Bochum, Germany, 2004, p.381-387

[227]

Jeanjean P. Re-Assessment of P-Y Curves for Soft Clays from Centrifuge Testing and Finite Element Modeling, Proc. Offshore Technology Conf., paper OTC 20158, Houston, Texas, May 2009

[228]

Templeton J.S. Finite Element Analysis of Conductor/Seafloor Interaction, Proc. Offshore Technology Conf., paper OTC 20197, Houston, Texas, May 2009

[229]

API RP 2T, Recommended Practice for Planning, Designing and Constructing Tension Leg Platforms, American Petroleum Institute, Washington DC (Рекомендованная практика по планированию, проектированию и строительству платформ с натянутыми связями, Американский нефтяной институт, Вашингтон, округ Колумбия)

[230]

Clukey E.C., Templeton J.S., Randolph M.F., Phillips R. Suction Caisson Response Under Sustained Loop Current Loads, Proc. Offshore Technology Conf., paper OTC 16843, Houston, Texas, May 2004

[231]

Andersen K.H., Jostad H.P. Foundation Design of Skirted Foundations and Anchors in Clay, Proc. Offshore Technology Conf., paper OTC 10824, Houston, Texas, May 1999

[232]

Andersen K.H., Jostad H.P. Shear Strength along Inside of Suction Anchor Skirt Wall in Clay, Proc. Offshore Technology Conf., paper OTC 16844, Houston, Texas, May 2004

[233]

Andersen K.H., Murff J.D., Randolph M.F., Clukey E., Erbrich C., Jostad H.P. et al. Suction Anchors for Deepwater Applications, Proc. Intl. Symposium on Frontiers in Offshore Geotechnics, ISFOG, Perth, Australia, September 2005

[234]

Chen W., Randolph M.F. Centrifuge Tests on Axial Capacity of Suction Caissons in Clay, Proc. Intl. Symposium on Frontiers in Offshore Geotechnics, ISFOG, Perth, Australia, September 2005

[235]

Chen W., Randolph M.F. Radial Stress Changes and Axial Capacity for Suction Caissons in Soft Clay. Geotechnique. 2007a, 57 (6) pp.499-511

[236]

Chen W., Randolph M.F. Uplift Capacity of Suction Caissons under Sustained and Cyclic Loading in Soft Clay. J. Geotech. Geoenviron. Eng. 2007b, 133 (11) pp.1352-1363

[237]

Clukey E.C., Morrison M.J. A Centrifuge Analytical Study to Evaluate Suction Caissons for TLP-Applications in the Gulf of Mexico, Proc. Intl. Conf. on Design and Performance of Deep Foundations, Dallas, Texas, October 1993, p.141-156

[238]

Dendani H., Colliat J.-L. Girassol: Design Analysis and Installation of the Suction Anchors, Proc. Offshore Technology Conf., paper OTC 14209, Houston, Texas, May 2002

[239]

Dendani H. Suction Anchors: Some Critical Aspects for their Design and Installation in Clayey Soils, Proc. Offshore Technology Conf., paper OTC 15376, Houston, Texas, May 2003

[240]

Randolph M.F., House A.R. Analysis of Suction Caisson Capacity in Clay, Proc. Offshore Technology Conf., paper OTC 14236, Houston, Texas, May 2002

[241]

Hogervorst J.R. Field Trials with Large Diameter Suction Piles. Proc. Offshore Technology Conf., paper OTC 3817, Houston, Texas, May 1980

[242]

Lunne T., Andersen K.H. Soft Clay Shear Strength Parameters for Deepwater Geotechnical Design, Proc. Intl. Conf. on Offshore Site Investigation and Geotechnics, SUT OSIG, London, U.K., September 2007

[243]

Colliat J.-L., Dendani H., Jostad H.P., Andersen K.H., Thorel L., Garnier J. et al. Centrifuge Testing of Suction Piles in Deepwater Nigeria Clay - Effect of Stiffeners and Set-Up Time, Proc. Intl. Symposium on Frontiers in Offshore Geotechnics, ISFOG II, Perth, Australia, November 2010

[244]

Bruton D., Carr M., White D.J. The Influence of Pipe-Soil Interaction on Lateral Buckling and Walking of Pipelines: The SAFEBUCK JIP, Proc. Intl. Conf. on Offshore Site Investigation and Geotechnics, SUT OSIG, London, U.K., September 2007, p.133-150

[245]

Westgate Z., White D.J., Randolph M.F. Video Observations of Dynamic Embedment During Pipelaying, Proc. Intl. Conf. on Offshore Mechanics and Arctic Engineering, OMAE, paper OMAE2009-79814, Honolulu, 2009

[246]

White D.J., Randolph M.F. Seabed Characterisation and Models for Pipeline-Soil Interaction, Intl. Journal of Offshore and Polar Engineering. ISOPE. 2007, 17 (3) pp.193-204

[247]

Lund K.M. Effect of Increase in Pipeline Soil Penetration from Installation, Proc. ETCE/OMAE2000 Joint Intl. Conf. on Energy for the New Millenium, paper OMAE2000/PIPE-5047, New Orleans, 2000

[248]

Cathie D.N., Jaeck C., Ballard J.C., Wintgens J.-F. Pipeline geotechnics - state-of-the-art, Proc. Intl. Symposium on Frontiers in Offshore Geotechnics, ISFOG, Perth, Australia, September 2005

[249]

White D.J., Cathie D.N. Geotechnics for Subsea Pipelines, Proc. Intl. Symposium on Frontiers in Offshore Geotechnics, ISFOG II, Perth, Australia, November 2010

[250]

Murff J.D., Wagner D.A., Randolph M.F. Pipe Penetration in Cohesive Soil. Geotechnique. 1989, 39 (2) pp.213-229

[251]

Randolph M.F., White D.J. Upper Bound Yield Envelopes for Pipelines at Shallow Embedment in Clay. Geotechnique. 2008b, 58 (4) pp.297-301

[252]

Pedersen R.C., Olson R.E., Rauch A.F. Shear and Interface Strength of Clay at Very Low Effective Stress. Geotechnical Testing Journal, ASTM. 2003, 26 (1) pp.71-78

[253]

Verley R., Sotberg T. A Soil Resistance Model for Pipelines Placed on Sandy Soils, Proc. Intl. Conf. on Offshore Mechanics and Arctic Engineering, OMAE, Calgary, 1992, 5-A, p.123-131

[254]

Verley R., Lund K.M. A Soil Resistance Model for Pipelines Placed on Clay Soils, Proc. Intl. Conf. on Offshore Mechanics and Arctic Engineering, OMAE, Copenhagen, 1995, 5, p.225-232

[255]

Bruton D.A.S., White D.J., Cheuk C.Y., Bolton M.D., Carr M.C. Pipe-Soil Interaction Behaviour during Lateral Buckling, Including Large Amplitude Cyclic Displacement Tests by the Safebuck JIP, Proc. Offshore Technology Conf., paper OTC 17944, Houston, Texas, May 2006

[256]

White D.J., Ganesan S.A., Bolton M.D., Bruton D.A.S., Ballard J.-C., Langford T. Safebuck JIP - Observations of Axial Pipe-Soil Interaction from Testing on Soft Natural Clays, Proc. Offshore Technology Conf., paper OTC 21249, Houston, Texas, May 2011

[257]

Merifield R.S., White D.J., Randolph M.F. Analysis of the Undrained Breakout Resistance of Partially Embedded Pipelines. Geotechnique. 2008, 58 (6) pp.461-470

[258]

Langford T.E., Dyvik R., Cleave R. Offshore Pipeline and Riser Geotechnical Model Testing: Practice and Interpretation, Proc. Intl. Conf. on Offshore Mechanics and Arctic Engineering, paper OMAE2007-29458, San Diego, California, June 2007

[259]

White D.J., Gaudin C. Simulation of Seabed Pipe-Soil Interaction Using Geotechnical Centrifuge Modelling, Proc. 1st Asia-Pacific Deep Offshore Technology Conf., DOT, Perth, Australia, December 2008

[260]

Hill A.J., White D.J., Bruton D.A.S., Langford T., Meyer V., Jewell R. et al. A New Framework for Axial Pipe-Soil Resistance, Illustrated by a Range of Marine Clay Datasets, Proc. 7th Intl. Conf. on Offshore Site Investigation and Geotechnics, SUT OSIG, London, September 2012

[261]

Ballard J.C., De Brier C., Stassen K., Jewell R.A. Observations of Pipe-Soil Response from In-Situ Measurements, Proc. Offshore Technology Conf., paper OTC 24154, Houston, Texas, May 2013

[262]

API RP 2SK, Recommended Practice for Design and Analysis of Stationkeeping Systems for Floating Structures, American Petroleum Institute, Washington DC (Рекомендованная практика по проектированию и расчету систем удержания плавучих сооружений, Американский нефтяной институт, Вашингтон, округ Колумбия)

[263]

Senders M., Randolph M.F. CPT-Based Method for the Installation of Suction Caissons in Sand. J. Geotech. Geoenviron. Eng. 2009 Jan.

[264]

Tjelta T.I. Geotechnical Experience from the Installation of the Europipe Jacket with Bucket Foundations, Proc. Offshore Technology Conf., paper OTC 7795, Houston, Texas, May 1995

[265]

Stove O.J., Bysveen S., Christophersen H.P. New Foundation Systems for the Snorre Development, Proc. Offshore Technology Conf., paper OTC 6882, Houston, Texas, May 1992

[266]

Ruinen R., Degenkamp G. Anchor selection and installation for shallow and deepwater mooring systems, Proc. 11th Intl. Seminar on Offshore and Polar Engineering, ISOPE, Stavanger, Norway, June 2001

[267]

Foxton P. Latest Developments for Vertically Loaded Anchors, Proc.2nd IBC Intl. Conf. on Mooring & Anchoring, Aberdeen, UK, June 1997

[268]

Wilde B., Treu H., Fulton T. Field Testing of Suction Embedded Plate Anchors, Proc. 11th Intl. Seminar on Offshore and Polar Engineering, ISOPE, Stavanger, Norway, June 2001

[269]

Brandao F.E.N., Henriques C.C.D., De Araujo J.B., Ferreira O.C. G, Dos Santos Amaral C., Albacora Leste Field Development - FPSO P-50 Mooring System Concept and Installation, Proc. Offshore Technology Conf., paper OTC 18243, Houston, Texas, May 2006

[270]

Zimmerman E.H., Smith M.W., Shelton J.T. Efficient Gravity Installed Anchor for Deepwater Mooring, Proc. Offshore Technology Conf., paper OTC 20117, Houston, Texas, May 2009

[271]

Lieng J.T., Tjelta T.I., Skaugset K. Installation of Two Prototype Deep Penetrating Anchors at the Gjoa Field in the North Sea, Proc. Offshore Technology Conf., paper OTC 20758, Houston, Texas, May 2010

[272]

DNVGL Recommended Practice DNV-RP-E301. Design and Installation of Fluke Anchors in Clay, DNVGL A/S, , Norway

[273]

Dunnavant T.W., Kwan C.T. Centrifuge Modelling and Parametric Analyses of Drag Anchor Behaviour, Proc. Offshore Technology Conf., paper OTC 7202, Houston, Texas, May 1993

[274]

DNVGL Recommended Practice DNV-RP-E302. Design and Installation of Plate Anchors in Clay, DNVGL A/S, , Norway

[275]

Andersen K.H., Lauritzen R. Bearing Capacity for Foundations with Cyclic loads. J. Geotech. Eng. 1988, 114 (GT5) pp.540-555

[276]

Dahlberg R., Strom P.J. Unique Onshore Tests of Deepwater Drag-In Plate Anchors, Proc. Offshore Technology Conf., paper OTC 10989, Houston, Texas, May 1999

[277]

NCEL, Technical Data Sheet 83-08R, Drag Embedment Anchors for Navy Moorings, Naval Civil Engineering Laboratory, June 1987

[278]

Neubecker S.N., Randolph M.F. The Static Equilibrium of Drag Anchors in Sand. Can. Geotech. J. 1996, 33 pp.574-583

[279]

Stevens J.B., Audibert J.M. Re-Examination of p-y Curve Formulations, Proc. Offshore Technology Conf., paper OTC 3402, Houston, Texas, May 1979

[280]

Hunt R.J., Chan J.H.-C., Doyle E.H. Driving Fatigue Estimation for Ursa TLP 96in OD Piles, Proc. 9th Intl. Seminar on Offshore and Polar Engineering, ISOPE, Brest, France, May 1999

[281]

Buitrago J., Wong P.C. Fatigue Design of Driven Piles for Deepwater Applications, Proc. 13th Intl. Seminar on Offshore and Polar Engineering, ISOPE, Honolulu, Hawaii, May 2003

[282]

DNVGL Recommended Practice DNV-RP-E303. Geotechnical Design and Installation of Suction Anchors in Clay DNVGL A/S, , Norway

[283]

Raines R.D., Ugaz O., Garnier J. Centrifuge Modelling of Suction Piles in Clay, Proc. Intl. Symposium on Frontiers in Offshore Geotechnics, ISFOG, Perth, Australia, September 2005

[284]

Skempton A.W. The Bearing Capacity of Clays, Proc. Building Research Congress, London, 1951

[285]

Erbrich C., Hefer P. Installation of the Laminaria Suction Piles - A Case History, Proc. Offshore Technology Conf., paper OTC 14240, Houston, Texas, May 2002

[286]

Andersen K., Andresen L., Jostad H.P., Clukey E. Effect of Skirt Geometry on Set-Up Outside Suction Anchors in Soft Clays, Intl. Conf. on Offshore Mechanics and Arctic Engineering, OMAE, paper OMAE2004-51564, Vancouver, 2004

[287]

Aas P.M., Saue M., Aarsnes J. Design Predictions and Measurements during Installation of Suction Anchors with and without Water-Flow System to Help Installation through Layered Soil Profiles, Proc. Offshore Technology Conf., paper OTC 20294, Houston, Texas, May 2009

[288]

Chen W.F. Limit Analysis and Soil Plasticity. Elsevier Publishing Comp, Amsterdam, 1975

[289]

Randolph M.F., Houlsby G.T., The Limiting Pressure on a Circular Pile Loaded Laterally in Cohesive Soil, , 34 (4), London, 1984, p.613-623

[290]

Murff J.D., Hamilton J.M. P-Ultimate for Undrained Analysis of Laterally Loaded Piles. J. Geotech. Eng. 1993, 119 (1) pp.91-107

[291]

Sparrevik P. Suction Anchor - A Versatile Foundation Concept Finding Its Place in the Offshore Market, Proc. 17th Intl. Conf. on Offshore Mechanics and Arctic Engineering, OMAE, paper 98-3096, Lisbon, July 1998

[292]

Randolph M., O'Neill M.P., Stewart D.P. Performance of Suction Anchors in Fine-Grained Calcareous Soils, Proc. Offshore Technology Conf., paper OTC 8831, Houston, Texas, 1998

[293]

Andersen K.H., Murff J.D., Randolph M. Deepwater Anchor Design Practice - Vol. II-2 Suction Caisson Anchors - 3D Finite Element Analyses and Comparison with Simplified Capacity Prediction Methods, Phase II Report submitted to API/Deepstar, 2004

[294]

McClelland В., Focht J.A. Soil Modulus for Laterally Loaded Piles. Trans. Am. Soc. Civ. Eng. 1958, 123 (1049)

[295]

Matlock H. Applications of Numerical Methods to Some Structural Problems in Offshore Operations. J. Pet. Technol. 1963, pp.1040-1046

[296]

Hamilton J.M., Murff J.D. Ultimate Lateral Capacity of Piles in Clay, Proc. Offshore Technology Conf., paper OTC 7667, Houston, Texas, May 1995

[297]

Grande L. Samvirke Mellom Pel og Jord, Lic. Techn. Thesis, NTH, Institute for Soil Mechanics and Foundation Engineering, Trondheim, Norway, 1976

[298]

Andersen K.H., Jostad H.P. Shear Strength Along Outside Wall of Suction Anchors in Clay After Installation, Proc. Intl. Seminar on Offshore and Polar Engineering, ISOPE, Kyushu, Japan, 2002

[299]

Bogard D. Effective Stress and Axial Pile Capacity: Lessons Learned from Empire, Proc. Offshore Technology Conf., paper OTC 13059, Houston, Texas, May 2001

[300]

Whittle A.J., Sutabutr T., Prediction of Pile Set-Up in Clay, Transportation Research Record, 1663, 1999, p.33-41

[301]

Clukey E., Aubeny C., Murff J.D. Comparison of Analytical and Centrifuge Model Tests for Suction Caissons Subjected to Combined Loads, Proc. 22nd Intl. Conf. on Offshore Mechanics and Arctic Engineering, OMAE, OMAE2003-37503, Cancun, Mexico, 2003

[302]

Aubeny C., Han S., Murff J.D. Refined Model for Inclined Load Capacity of Suction Caissons, Proc. 22nd Intl. Conf. on Offshore Mechanics and Arctic Engineering, OMAE, Cancun, Mexico, 2003

[303]

Colliat J.-L., Boisard P., Andersen K.H., Schroeder K. Caisson Foundations as Alternative Anchors for Permanent Mooring of a Process Barge Offshore Congo, Proc. Offshore Technology Conf., paper OTC 7797, Houston, Texas, May 1995

[304]

Bhattacharjee S., Majhi S., Smith D., Garrity R. Serpentina FPSO Mooring Integrity Issues and System Replacement: Unique Fast Track Approach, Proc. Offshore Technology Conf., paper OTC 25449-MS, Houston, Texas, May 2014

[305]

Arslan H., Peterman B.R., Wong P.C., Bhattacharjee S. Remaining Capacity of the Suction Pile due to Seabed Trenching, Proc. Intl. Seminar on Offshore and Polar Engineering, ISOPE, Hawaii, USA, June 2015

[306]

Colliard D., Wallerand R. Design and Installation of Suction Piles in West Africa Deepwaters, Proc. 2nd BGA Intl. Conf. on Foundations, ICOF, British Geotechnical Association, Univ. of Dundee, Scotland, UK, 2008

[307]

Murff J.D., Randolph M.F., Elkhatib S., Kolk H.J., Ruinen R., Strom P.J. et al. Vertically Loaded Plate Anchors for Deepwater Applications, Proc. Intl. Symposium on Frontiers in Offshore Geotechnics, ISFOG, Perth, Australia, September 2005

[308]

Dahlberg R., Resseguier S. Improved Predictions of MODU Fluke Anchors Increases the Confidence in Mooring System Design, Proc. Offshore Technology Conf., paper OTC 20085, Houston, Texas, May 2009

[309]

Ruinen R. Penetration Analysis of Drag Embedment Anchors in Soft Clays, Proc. Intl. Seminar on Offshore and Polar Engineering, ISOPE, Toulon, France, 2004

[310]

Dahlberg R., Ronold K.O., Strom P.J., Mathiesen J. New Calibrated Design Code for Plate Anchors in Clay, Proc. Offshore Technology Conf., paper OTC 16109, Houston, May 2009

[311]

Shelton J.Т., Nie C., Schuler D. Installation Penetration of Gravity Installed Plate Anchors - Laboratory Study Results and Field History Data, Proc. Offshore Technology Conf., paper OTC 22502-PP, Rio de Janeiro, Brazil, October 2011

[312]

O'Loughlin C.D., Randolph M.F., Richardson M. Experimental and Theoretical Studies of Deep Penetrating Anchors, Proc. Offshore Technology Conf., paper OTC 16841, Houston, Texas, May 2004

[313]

Beard R.M. Expendable Doppler Penetrometer for Deep Ocean Sediment Measurements. In: Strength Testing of Marine Sediments: Laboratory and In-Situ Measurements, ASTM STP 883. American Society for Testing and Materials, Philadelphia, 1985, pp.101-24.

[314]

True D.G. Penetration of Projectiles into Seafloor Soils, Technical Report R-822, Civil Engineering Laboratory, Naval Construction Battalion Center, Port Hueneme, California 93043, May 1975

УДК 624.157:006.354

ОКС 47.020.99

Ключевые слова: нефтяная и газовая промышленность, морские нефтегазопромысловые сооружения, фундаменты мелкого заложения, фундаменты свайные, несущая способность, проектирование, геотехнические аспекты, связные грунты, несвязные грунты