[1] | DEERE D.U. (1963): Technical description of rock cores for engineering purposes. - Rock. Mech. Eng.Geol., 1, pp.18-22 |
[2] | DEERE D.U. (1968): Geological considerations. - In Stagg, K.G. & Zienkiewicz, O.C. (Eds.): Rock mechanics in engineering practice, John Wiley Sons |
[3] | EN 12670, Natural stone - Terminology |
[4] | HOEK E. and BROWN E.T (1980): Underground excavations in rock. - The Instiution of Mining and Metallurgy, London |
[5] | FOLK R.L. (1959): Practical petrographic classification of limestones. - AAPG (Amer. Assoc, of Petrol. Geologists) Bull., KV 43, pp.1-38 |
[6] | IAEG (1981): Rock and Soil Description and Classification for Engineering Geological Mapping. - Bulletin of the International Association of Engineering Geology, No. 24, pp.235-274 |
[7] | ISRM (1977a): Suggested Method for Petrographic Description of Rocks. - Int. J. Rock Mech. Min. Sci. & Geomech. Abstr. Vol.15, pp.41-45 |
[8] | ISRM (1977b): Suggested Methods for the Quantitative Description of Discontinuities in Rock Masses. - Int. J. Rock Mech. Min. Sci. & Geomech. Abstr. Vol.15, pp.319-368 |
[9] | ISRM (1978): Suggested Methods for Determining the Uniaxial Compressive Strength and Deformability of Rock Materials. - Int. J. Rock Mech. Min. Sci. & Geomech. Abstr. Vol.16, pp.135-140 |
[10] | ISRM (1980): Basic Geotechnical Description of Rock Masses. - Int. J. Rock Mech. Min. Sci. & Geomech. Abstr. Vol.18, pp.85-110 |
[11] | ISRM (1984): Suggested Method for Determining Point Load Strength. - Int. J. Rock Mech. Min. Sci. & Geomech. Abstr. Vol.22, No. 2, pp.51-60 |
[12] | ISRM (1996): Commission on Rock grouting, Final Report. - J. Rock Mech. Min. Sci, Vol.33, Nr.8, Pergamon Press |
[13] | ISRM (1999): Suggested Method for complex stress-strain curve for intact rock on uniaxial compression. - Int. J. Rock, Mech.Min.Sci. & Geomech. Abstr. Vol.36, pp.279-289 |
[14] | ISSMFE (1994) Testing Method of Indurated Soils and Soft Rocks - Suggestions and Recommendations, ISSMFE Technical committee on Indurated Soils and Soft Rocks, pp.65-69, 1994 |
[15] | KANY M. (1997) Geocol - Colour charts, Beuth Verlag, Berlin |
[16] | KRAEFT U. (1997): Classification of Rock and Minerals. Europ. Geologist, pp.53-54 |
[17] | LE MAITRE (Ed.), BATEMANN P., DUDEK J. et al.: A Classification of Igneous Rock and Glossary of Terms: Recommandations of the Union of Geological Sciences Subcommission on Systematics of Igneous Rock (1989): Blackwell Sci. Publ., Oxford |
[18] | ISO 14688-1, Geotechnical investigation and testing - Identification and classification of soil - Part 1: Identification and description |
[19] | ISO 14688-2, Geotechnical investigation and testing - Identification and classification of soil - Part 2: Classification principles |
[20] | ISO 22475 (all parts), Geotechnical investigation and testing - Drilling and sampling methods and groundwater measurements |
УДК 624.131.3(0863.74) | ОКС 93.020 |
Ключевые слова: геотехнические исследования, геотехнические испытания, классификация горных пород, идентификация, описание |
Редакция документа с учетом
изменений и дополнений подготовлена
АО "Кодекс"