Статус документа
Статус документа

ГОСТ Р ИСО 3746-2013 Акустика. Определение уровней звуковой мощности и звуковой энергии источников шума по звуковому давлению. Ориентировочный метод с использованием измерительной поверхности над звукоотражающей плоскостью

Библиография

[1]

ISO 3740, Acoustics - Determination of sound power levels of noise sources - Guidelines for the use of basic standards

[2]

ISO 3741, Acoustics - Determination of sound power levels and sound energy levels of noise sources using sound pressure - Precision methods for reverberation test rooms

[3]

ISO 3743-1, Acoustics - Determination of sound power levels and sound energy levels of noise sources using sound pressure - Engineering methods for small movable sources in reverberant fields - Part 1: Comparison method for a hard-walled test room

[4]

ISO 3743-2, Acoustics - Determination of sound power levels of noise sources using sound pressure - Engineering methods for small, movable sources in reverberant fields - Part 2: Methods for special reverberation test rooms

[5]

ISO 3745, Acoustics - Determination of sound power levels and sound energy levels of noise sources using sound pressure - Precision methods for anechoic test rooms and hemi-anechoic test rooms

[6]

ISO 3747, Acoustics - Determination of sound power levels and sound energy levels of noise sources using sound pressure - Engineering/survey methods for use in situ in a reverberant environment

[7]

ISO 4871, Acoustics - Declaration and verification of noise emission values of machinery and equipment

[8]

ISO 6926, Acoustics - Requirements for the performance and calibration of reference sound sources used for the determination of sound power levels

[9]

ISO 7574-1, Acoustics - Statistical methods for determining and verifying stated noise emission values of machinery and equipment - Part 1: General considerations and definitions

[10]

ISO 7574-2, Acoustics - Statistical methods for determining and verifying stated noise emission values of machinery and equipment - Part 2: Methods for stated values for individual machines

[11]

ISO 7574-3, Acoustics - Statistical methods for determining and verifying stated noise emission values of machinery and equipment - Part 3: Simple (transition) method for stated values for batches of machines

[12]

ISO 7574-4, Acoustics - Statistical methods for determining and verifying stated noise emission values of machinery and equipment - Part 4: Methods for stated values for batches of machines

[13]

ISO 9296, Acoustics - Declared noise emission values of computer and business equipment

[14]

ISO 9614-1, Acoustics - Determination of sound power levels of noise sources using sound intensity - Part 1: Measurement at discrete points

[15]

ISO 9614-2, Acoustics - Determination of sound power levels of noise sources using sound intensity - Part 2: Measurement by scanning

[16]

ISO 9614-3, Acoustics - Determination of sound power levels of noise sources using sound intensity - Part 3: Precision method for measurement by scanning

[17]

ISO 11200, Acoustics - Noise emitted by machinery and equipment - Guidelines for the use of basic standards for the determination of emission sound pressure levels at a work station and at other specified positions

[18]

ISO 11201, Acoustics - Noise emitted by machinery and equipment - Determination of emission sound pressure levels at a work station and at other specified positions in an essentially free field over a reflecting plane with negligible environmental corrections

[19]

ISO 11202, Acoustics - Noise emitted by machinery and equipment - Determination of emission sound pressure levels at a work station and at other specified positions applying approximate environmental corrections

[20]

ISO 11203, Acoustics - Noise emitted by machinery and equipment - Determination of emission sound pressure levels at a work station and at other specified positions from the sound power level

[21]

ISO 11204, Acoustics - Noise emitted by machinery and equipment - Determination of emission sound pressure levels at a work station and at other specified positions applying accurate environmental corrections

[22]

ISO/TR 25417, Acoustics - Definitions of basic quantities and terms

[23]

ISO 80000-8, Quantities and units - Part 8: Acoustics

[24]

WITTSTOCK, V. On the uncertainty of meteorological corrections in sound power determination. Proceedings Inter-Noise 2004, CD-ROM, Prague, 2004

[25]

DAVIES, R.S. Equation for the determination of the density of moist air. Metrologia 1992, 29, pp.67-70

[26]

CRAMER, O. The variation of the specific heat ratio and the speed of sound in air with temperature, humidity and CO2 concentration. J. Acoust. Soc. Am. 1993, 93, pp.2510-2516

[27]

, G. Final results of a round robin test determining the sound power of machine/equipment. Proceedings Inter-Noise 1997, Budapest, 1997, pp.1317-1322

[28]

HELLWEG, R.D. International round robin test of ISO/DIS 7779. Proceedings Inter-Noise 1988, Avignon, 1988, pp.1105-1108

[29]

WONG, G.S.K. Comments on "The variation of the specific heat ratio and the speed of sound in air with temperature, pressure, humidity, and CO2 concentration" [J.Acoust. Soc. Am. 93, 2510-2516 (1993)], J.Acoust. Soc. Am. 1995, 97, pp.3177-3179

[30]

PROBST, W. Checking of sound emission values. Bremerhaven: Wirtschaftsverlag NW, Verlag Neue Wissenschaft, 1999. 102 p. (Schriftenreihe der Bundesanstalt Arbietsschutz und Arbeitsmedizin: Forschung, Fachbericht [Special report], 851.)

               

УДК 534.322.3.08:006.354

ОКС 17.140.01

Ключевые слова: шум машин, уровень звуковой мощности, уровень звуковой энергии, уровень звукового давления, звуковое поле, испытательное пространство, звукоотражающая плоскость, измерительная поверхность, огибающий параллелепипед, ориентировочный метод измерений

     


Электронный текст документа
подготовлен АО "Кодекс" и сверен по:
официальное издание
М.: Стандартинформ, 2019