ГОСТ Р 53580-2009 Трубы стальные для промысловых трубопроводов. Технические условия

[1]

ISO 7438:2005

Metallic materials - Bend test

[2]

ISO 11484:2009

Steel products - Employer's qualification system for nondestructive testing (NDT) personnel

[3]

Международный стандарт ИСО 404:92

Сталь и стальные изделия. Общие технические условия поставки

(ISO 404:1992)

(Steel and steel products; general technical delivery requirements)

_______________

Перевод данного международного стандарта находится в Федеральном информационном фонде технических регламентов и стандартов.

[4]

РД 03-615-03

Порядок применения сварочных технологий при изготовлении, монтаже, ремонте и реконструкции технических устройств для опасных производственных объектов

[5]

ПБ 03-273-99

Правила аттестации сварщиков и специалистов сварочного производства

[6]

DIN EN 287-1:2006

Qualification test of welders - Fusion welding - Part 1: Steels; German version EN 287-1:2004 + A2:2006

[7]

РД 03-495-02

Технологический регламент проведения аттестации сварщиков и специалистов сварочного производства

[8]

ПБ 03-440-02

Правила аттестации персонала в области неразрушающего контроля

[9]

ISO 9402:1989

Seamless and welded (except submerged arc-welded) steel tubes for pressure purposes; full peripheral magnetic transducer/flux leakage testing of ferromagnetic steel tubes for the detection of longitudinal imperfections

[10]

ISO 9598:1989

Seamless steel tubes for pressure purposes; full peripheral magnetic transducer/flux leakage testing of ferromagnetic steel tubes for the detection of transverse imperfections

[11]

ASTM Е 570

Standard practice for flux leakage examination of ferromagnetic steel tubular products

[12]

ISO 9304:1989

Seamless and welded (except submerged arc-welded) steel tubes for pressure purposes; eddy current testing for the detection of imperfections

[13]

ISO 9764:1989

Electric resistance and induction welded steel tubes for pressure purposes; ultrasonic testing of the weld seam for the detection of longitudinal imperfections

[14]

Международный стандарт ИСО 9765:90

Трубы стальные напорные, изготовленные методом дуговой сварки под флюсом. Ультразвуковой контроль сварного шва для обнаружения продольных и/или поперечных несовершенств

(ISO 9765:1990)

(Submerged arc-welded steel tubes for pressure purposes; ultrasonic testing of the weld seam for the detection of longitudinal and/or transverse imperfections)

_______________

Перевод данного международного стандарта находится в Федеральном информационном фонде технических регламентов и стандартов.

[15]

ISO 13664:1997

Seamless and welded steel tubes for pressure purposes - Magnetic particle inspection of the tube ends for the detection of laminar imperfections

[16]

ISO 13665:1997

Seamless and welded steel tubes for pressure purposes - Magnetic particle inspection of the tube body for the detection of surface imperfections

[17]

ISO 12096:1996

Submerged arc-welded steel tubes for pressure purposes - Radiographic testing of the weld seam for the detection of imperfections

[18]

ISO 12095:1994

Seamless and welded steel tubes for pressure purposes - Liquid penetrant testing

[19]

ASTM A 578

Standard specification for straight-beam ultrasonic examination of plain and clad steel plates for special applications

[20]

ASTM A 435

Standard specification for straight-beam ultrasonic examination of steel plates

[21]

Международный стандарт
ИСО 12094:94

Трубы стальные сварные напорные. Ультразвуковой контроль для обнаружения несовершенств в виде расслоений в рулонном или листовом прокате, используемом для изготовления сварных труб

(ISO 12094:1994)

(Welded steel tubes for pressure purposes - Ultrasonic testing for the detection of laminar imperfections in strips/plates used in the manufacture of welded tubes)

_______________

Перевод данного международного стандарта находится в Федеральном информационном фонде технических регламентов и стандартов.

[22]

ASTM E 1815:06

Standard test method for classification of film systems for industrial radiography

[23]

ISO 11699-1:2008

Non-destructive testing - Industrial radiographic film - Part 1: Classification of film systems for industrial radiography

[24]

ISO 19232-1:2004

Non-destructive testing - Image quality of radiographs - Part 1: Image quality indicators (wire type) - Determination of image quality value

[25]

ASTM E 747:04

Standard practice for design. Manufacture and material grouping classification of wire image quality indicators (IQI) used for radiology

[26]

ISO 10124:1994

Seamless and welded (except submerged arc-welded) steel tubes for pressure purposes - Ultrasonic testing for the detection of laminar imperfections

[27]

ISO 13663:1995

Welded steel tubes for pressure purposes - Ultrasonic testing of the area adjacent to the weld seam for the detection of laminar imperfections

[28]

Международный стандарт
ИСО 15156-2:2003

Промышленность нефтяная и газовая. Материалы для применения в средах, содержащих сероводород, при нефте- и газодобыче. Часть 2. Трещиностойкие углеродистые и низколегированные стали и применение литейного чугуна

(ISO 15156-2:2003)

(Petroleum and natural gas industries - Materials for use in HS-containing environments in oil and gas production - Part 2: Cracking-resistant carbon and low alloy steels, and the use of cast irons)

_______________

Перевод данного международного стандарта находится в Федеральном информационном фонде технических регламентов и стандартов.

[29]

NACE ТМ 0284:2003

Standard test method - Evaluation of pipeline and pressure vessel steels for resistance to hydrogen-induced cracking

[30]

NACE TM 0177:2005

Laboratory testing of metals for resistance to sulfide stress cracking and stress corrosion cracking in HS environments

[31]

ISO 7539-2:1989

Corrosion of metals and alloys - Stress corrosion testing - Part 2: Preparation and use of bent-beam specimens

[32]

ASTM G 39

Standard practice for preparation and use of bent-beam stress-corrosion test specimens

[33]

ISO 9303:1989

Seamless and welded (except submerged arc-welded) steel tubes for pressure purposes; full peripheral ultrasonic testing for the detection of longitudinal imperfections

[34]

ISO 9305:1989

Seamless steel tubes for pressure purposes; full peripheral ultrasonic testing for the detection of transverse imperfections

[35]

ISO 11496:1993

Seamless and welded steel tubes for pressure purposes; ultrasonic testing of tube ends for the detection of laminar imperfections

[36]

BS EN 10027-2:1992

Designation systems for steels. Steel numbers