ГОСТ ISO 11202-2016 Шум машин. Определение уровней звукового давления излучения на рабочем месте и в других контрольных точках с приближенными коррекциями на свойства испытательного пространства

 [1]

ISO 1996-1, Acoustics - Description, measurement and assessment of environmental noise - Part 1: Basic quantities and assessment procedures

[2]

ISO 3534-2, Statistics - Vocabulary and symbols - Part 2: Applied statistics

[3]

ISO 3740, Acoustics - Determination of sound power levels of noise sources - Guidelines for the use of basic standards

[4]

ISO 3741, Acoustics - Determination of sound power levels and sound energy levels of noise sources using sound pressure - Precision methods for reverberation test rooms

[5]

ISO 3743-1, Acoustics - Determination of sound power levels of noise sources - Engineering methods for small, movable sources in reverberant fields - Part 1: Comparison method for hard-walled test rooms

[6]

ISO 3743-2, Acoustics - Determination of sound power levels of noise sources using sound pressure - Engineering methods for small, movable sources in reverberant fields - Part 2: Methods for special reverberation test rooms

[7|

ISO 3745, Acoustics - Determination of sound power levels of noise sources using sound pressure - Precision methods for anechoic and hemi-anechoic rooms

[8]

ISO 3747, Acoustics - Determination of sound power levels and sound energy levels of noise sources using sound pressure - Engineering/survey methods for use in situ in a reverberant environment

[9]

ISO 4871, Acoustics - Declaration and verification of noise emission values of machinery and equipment

[10]

ISO 6926, Acoustics - Requirements for the performance and calibration of reference sound sources used for the determination of sound power levels

[11]

ISO 7574-1, Acoustics - Statistical methods for determining and verifying stated noise emission values of machinery and equipment - Part 1: General considerations and definitions

[12]

ISO 9614-1, Acoustics - Determination of sound power levels of noise sources using sound intensity - Part 1: Measurement at discrete points

[13]

ISO 9613-2, Acoustics - Attenuation of sound during propagation outdoors - Part 2: General method of calculation

[14]

ISO 9614-3, Acoustics - Determination of sound power levels of noise sources using sound intensity - Part 3: Precision method for measurement by scanning

[15]

ISO 11200, Acoustics - Noise emitted by machinery and equipment - Guidelines for the use of basic standards for the determination of emission sound pressure levels at a work station and at other specified positions

[16]

ISO 11201, Acoustics - Noise emitted by machinery and equipment - Determination of emission sound pressure levels at a work station and at other specified positions in an essentially free field over a reflecting plane with negligible environmental corrections

[17]

ISO 11203, Acoustics - Noise emitted by machinery and equipment - Determination of emission sound pressure levels at a work station and at other specified positions from the sound power level

[18]

ISO 11204, Acoustics - Noise emitted by machinery and equipment - Determination of emission sound pressure levels at a work station and at other specified positions applying accurate environmental corrections

[19]

ISO 11205, Acoustics - Noise emitted by machinery and equipment - Engineering method for the determination of emission sound pressure levels in situ at the work station and at other specified positions using sound intensity

[20]

ISO/TR 11690-3, Acoustics - Recommended practice for the design of low-noise workplaces containing machinery - Part 3: Sound propagation and noise prediction in workrooms

[21]

ISO/TR 25417:2007, Acoustics - Definitions of basic quantities and terms

[22]

JONASSON, H.G., OLOFSSON, J. Measurement of impulse noise. Boras: Swedish National Testing and Research institute, 1997. 51 p. (SP Report 1997:38)

[23]

JONASSON, H.G. Determination of emission sound pressure level and sound power level in situ. Boras: Swedish National Testing and Research institute, 1999. 80 p. (SP Report 1999:18)

[24]

OLOFSSON, J., JONASSON, H.G. Measurement of impulse noise - An inter-Nordic comparison. Boras:SP, 1998. 28 p. (Nordtest Report 426; SP Report 1998:47)

[25]

PROBST, W. Checking of sound emission values. Bundesanstalt fur Arbeitsschutz und Arbeitsmedizin, Dortmund, 1999. 102 p. (Report Fb 851)

[26]

PROBST, W. Untersuchung der EinflussgroBen auf die Ermittlung der Emissionsschalldruckpegel von Maschinen [Investigation of the quantities influencing the determination of the emission sound pressure levels of machinery]. Bundesanstalt fur Arbeitsschutz und Arbeitsmedizin, Dortmund, 2002. 79 p. (Report Fb 968)

 [27]

PROBST, W. Improvements in the determination of the emission sound pressure level of machines. Bundesanstalt fur Arbeitsschutz und Arbeitsmedizin, Dortmund, 2004. 116 p. (Report Fb 1034)

[28]

HUBNER, G., SEHRNDT, G.A. Accuracy consideration in sound power measurement for noise radiated by machines under free field conditions. In: Proceedings of the 6th International Congress on Acoustics (ICA), Tokyo, 1968

[29]

HUBNER, G. Analysis of errors in measuring machine noise under free-field conditions. J. Acoust. Soc. Am, 1973, 54, pp.967-977

[30]

HUBNER, G., WU, J., MESSNER, J. Ringversuch zur Bestimmung des Schalleistungspegels [Interlaboratory test for the determination of sound-power level]. Bundesanstalt fur Arbeitsschutz und Arbeitsmedizin, Dortmund, 1996. 395 p. (Report Fb 736.)

[31]

HUBNER, G. Final results of a national round robin test determining the sound power level of machines/equipment. In: Proceedings of InterNoise 1997, Budapest, 1997

[32]

HUBNER, G. Remarks on the Guide to the expression of uncertainty in measurement (GUM) published by ISO and other international organizations - Floating error analysis for an acoustic example. In: Proceedings of InterNoise 2002, Dearborn, Ml, 2002

[33]

HUBNER, G. Accuracy consideration on the meteorological correction for a normalized sound power. In: Proceedings of InterNoise 2000, Nice, 2000

УДК 534.322.3.08:006.354

МКС 17.140.20

IDT

Ключевые слова: уровень звука звукового давления излучения, огибающий параллелепипед, точный метод, ориентировочный метод, неопределенность измерения, фактический показатель направленности рабочего места