ГОСТ Р МЭК 62342-2016 Атомные станции. Контроль и управление, важные для безопасности. Управление старением

[1]

IAEA NS-R-1:2000, Safety of Nuclear Power Plants: Design Requirements

[2]

 IAEA NS-G-1.3:2002, Instrumentation and Control Systems Important to Safety in Nuclear Power Plants

[3]

IAEA 50-C-QA:1989, Safety code for nuclear power plants: Quality assurance

[4]

 IAEA 50-C/SG-Q:1996, Quality assurance for safety in nuclear power plants and other nuclear installations

[5]

 IAEA-TECDOC-1147, "Management on ageing of l&C equipment in nuclear power plants", International Atomic Energy Agency, Vienna, Austria (June 2000)

[6]

IAEA-TECDOC-1402, "Management of life cycle and ageing at nuclear power plants: Improved l&C maintenance", International Atomic Energy Agency, Vienna, Austria (August 2004)

[7]

IAEA Safety Glossary, 2006

[8]

IAEA Safety Reports Series No. 15, "Implementation and Review of a Nuclear Power Plant Ageing Management Programme", International Atomic Energy Agency, Vienna, Austria (1999)

[9]

IAEA Safety Reports Series No. 3, "Equipment Qualification in Operational Nuclear Power Plants: Upgrading, Preserving and Reviewing", International Atomic Energy Agency, Vienna, Austria (1998)

[10]

 IAEA Safety Standards Series No. NS-G-1.3, "Instrumentation and Control Systems Important to Safety in Nuclear Power Plants Safety Guide", International Atomic Energy Agency, Vienna, Austria (April 2002)

[11]

IEC 60050-393, International Electrotechnical Vocabulary - Part 393: Nuclear instrumentation - Physical phenomena and basic concepts

[12]

IEC 60050-394, International Electrotechnical Vocabulary - Part 394: Nuclear instrumentation - Instruments

[13]

IEC 60780, Nuclear power plants - Electrical equipment of the safety system - Qualification

[14]

IEC 62096, Nuclear power plants - Instrumentation and control - Guidance for the decision on modernization

[15]

IEC 62385, Nuclear power plants - Instrumentation and control important to safety - Methods for assessing the performance of safety system instrument channels

[16]

IEC 62397, Nuclear power plants - Instrumentation and control important to safety - Resistance temperature detectors

[17]

Hashemian, H.M., "Sensor Performance and Reliability", The Instrumentation, Systems, and Automation Society (ISA), Research Triangle Park, North Carolina (2005)

[18]

"Advanced Instrumentation and Maintenance Technologies for Nuclear Power Plants", U.S. Nuclear Regulatory Commission, NUREG/CR-5501 (August 1998)

[19]

"Extending the Calibration Interval of Pressure Transmitters in Nuclear Power Plants", 13th Annual Joint ISA POW-ID/EPRI Controls and Instrumentation Conference, Williamsburg, Virginia (June 15-19, 2003)

[20]

 Hashemian, H.M., "Maintenance of Process Instrumentation in Nuclear Power Plants", Springer-Verlag GmbH, Heidelberg, Germany (2007)

[21]

EPRI Topical Report, "On-Line Monitoring of Instrument Channel Performance", TF-104965-R1 NRC SER, Electric Power Research Institute, Final Report (September 2000)

УДК 621.311.049.75:006.354

ОКС 27.120.20

 IDT

Ключевые слова: атомные станции; системы контроля и управления, важные для безопасности; старение; управление старением; эффект старения