[1] | МЭК 61709:2017 | Компоненты электрические. Надежность. Стандартные условия для интенсивностей отказов и модели напряжений для преобразования (Electronic components - Reliability - Reference conditions for failure rates and stress models for conversion) |
[2] | РД 50-204-87 Методические указания. Надежность в технике. Сбор и обработка информации о надежности изделий в эксплуатации. Основные положения | |
[3] | V.Loll, From Reliability Prediction to a Reliability Budget, Proceedings of the Annual Reliability and Maintainability Symposium, 1998 | |
[4] | Fick, Uber Diffusion, Poggendorff's Annalen, vol. 94, p.59, 1855 | |
[5] | W.Weibull. Statistical Design of Fatigue Experiment//Journal of Applied Mechanics, pp.109-113, March, 1952 | |
[6] | D.Kececioglu and J.Jacks. The Arrhenius, Eyring. Inverse Power Law and Combination Models in Accelerated Life Testing//Reliability Engineering, vol.8, pp.1-9, 1984 | |
[7] | D.S.Peck and O.D. Trapp. Accelerated Testing Handbook//Technology Associates, Portola Valley, CA, 1987 | |
[8] | W.Nelson. Accelerated Testing: John Wiley & Sons, New York, 1990 | |
[9] | D.J.Klinger. On the Notion of Activation Energy in Reliability: Arrhenius, Eyring and Thermodynamics. Proceedings of the Reliability and Maintainability Symposium, pp.295-300, 1991 | |
[10] | J.M.Hu, D.Barker, A.Dasgupta and A.Arora. Role of Failure Mechanism Identification in Accelerated Testing. Proceedings of the Reliability and Maintainability Symposium, pp.181-188, 1992 | |
[11] | S.Arrhenius, Z.Physik//Chem. vol.4, 1889 | |
[12] | L.F.Coffin, Jr. A Study of the Effects of Cyclic Thermal Stresses on a Ductile Metal//Transactions of the ASME, vol.76, 5p. 931-950, 1954 | |
[13] | S.S.Manson. Fatigue: A Complex Subject-Some Simple Approximations//Experimental Mechanics, vol. 5, no. 7, pp.193-226, 1965 | |
[14] | L.F.Coffin, Jr. The Effect of Frequency on the Cyclic Strain and Low Cycle Fatigue Behavior of Cast Udimet 500 at Elevated Temperature//Metallurgical Transactions, vol. 2, pp.3105-3113, 1971 | |
[15] | W.Engelmaier. Fatigue Life of Leadless Chip Carrier Solder Joints During Power Cycling//IEEE Transactions on Components, Hybrids, and Manufacturing Technology, vol. CHMT-6, no.3, 1985 | |
[16] | D.R.Olsen and H.M.Berg. Properties of Bond Alloys Relating to Thermal Fatigue//IEEE Transactions on Components, Hybrids, and Manufacturing Technology, vol. CHMT-2, 1979 | |
[17] | H.D.Solomon. Low Cycle Fatigue of Surface Mounted Chip Carrier/Printed Wiring Board Joints. Proceedings of the 39th Electronic Components Conference, IEEE, pp.277-292, 1989 | |
[18] | J.K.Hagge. Predicting Fatigue Life of Leadless Chip Carriers Using Manson-Coffin Equations, Proceedings of the IEPS, pp.199-208, 1982 | |
[19] | C.F.Dunn and J.W.McPherson. Temperature-Cycling Acceleration Factors for Aluminum Metallization Failure in VLSI Applications. Proceedings of the 28th International Reliability Physics Symposium, IEEE, pp. 252-258, 1990 | |
[20] | S.Glasstone, K.J.Laidler and H.E.Eyring. The Theory of Rate Processes, McGraw-Hill, New York, 1941 | |
[21] | D.S.Peck. Comprehensive Model of Humidity Testing Correlation, Proceedings of the 24th International Reliability Physics Symposium, IEEE, pp. 44-50, 1986 | |
[22] | D.S.Peck and W.R.Thorpe, Highly Accelerated Stress Test History, Some Problems and Solutions. Tutorial Notes, 28th Reliability Physics Symposium, IEEE, pp.4.1-4.27, 1990 | |
[23] | F.Jensen. How to Succeed in Modeling, Quality and Reliability//Engineering International, vol.15, p.159, 1999 |
УДК 658.562.012.7:65.012.122:006.354 | ОКС 03.120.30 |
Ключевые слова: надежность, показатель надежности, анализ долговечности, стадии жизненного цикла, анализ подобия, наработка до отказа, структурная схема надежности, техническое обслуживание, ориентированное на безотказность, интенсивность отказов, функция распределения, вероятность безотказной работы |
Электронный текст документа
подготовлен АО "Кодекс" и сверен по:
официальное издание
М.: Стандартинформ, 2019